You are here

Transformers & Chokes

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(36 pages)
P-T1750MTransformer - Hammond, Output for Fender, 50W 4.2kΩ, general
General Replacement
Equivalent to manufacturer part number #125A13A and #022871
Warning: Not all amplifier models of the same name use the same transformer model.
$75.74
Click to read more about this product.
P-TM-P100Transformer - Marshall Replacement, Power, 100 W
100 watt replacement power transformer for Marshall. Good replacement for JMP and JCM800s. for EL34!
Built to vintage specs with exact interleave ratios and materials. Gives great classic sound.
Great for upgrading later issue Marshall amps.
$89.95
Click to read more about this product.
P-T156GFilter Choke - Hammond, Open Bracket, 9 H, 40 mA, 300 ohm
  • Inductance: 9 H
  • D.C. Current: 40 mA
  • Resistance: 300 ohms
  • Maximum Operating Voltage: 400 V
  • Features
    • Economical "open bracket" - channel mount.
    • Tolerance of 15% on both inductance & resistance.
    • Inductances measured at rated D.C.

$14.41
Click to read more about this product.
P-T158MFilter Choke - Hammond, Open Bracket, 10 H, 100 mA
  • Inductance: 10 H
  • D.C. Current: 100 mA
  • Resistance: 195 ohms
  • Maximum Operating Voltage: 400 V
  • Features
    • Economical "open bracket" - channel mount.
    • Tolerance of 15% on both inductance & resistance.
    • Inductances measured at rated D.C.

$21.67
Click to read more about this product.
P-C194CChoke - Hammond, replacement for Marshall Plexi JCM800
Replacement for Marshall Plexi JCM 800.
Specifications:
  • Inductance ± 15%: 40 H
  • D.C. Current: 50 mA
Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
$34.77
Click to read more about this product.
P-T193HFilter Choke - Hammond, Enclosed, 5 H, 200 mA

Specifications



  • Inductance: 5 H
  • D.C. Current: 200 mA
  • Resistance: 65 Ω
  • Max. Voltage: 600 VDC


Features:



  • Enclosed, 4-hole mount chokes
  • Tolerance of 15% on both inductance & resistance.
  • Inductances measured at rated D.C.

$39.92
Click to read more about this product.
P-TF22723Transformer - Fender® Replacement, Power, 325-0-325 V, 180 mA
Replacement for Fender Vibrolux and Tremolux Blackface AA763 (1963-1966).

Equivalent to #125P26A & # 036483. 35 Watts.
$69.95
Click to read more about this product.
P-T290DXTransformer - Hammond, 120V for Super Reverb, Pro Reverb, etc.
Replacement for Fender Super Reverb, Pro Reverb, Bandmaster Reverb, Tweed Bassman
Equivalent to Fender part number 125P5D & 022798
Primary:120 VAC, 60 Hz.
For 240V version, see P-T290DEX
Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
Warning: Not all amplifier models of the same name use the same transformer model.
$98.42
Click to read more about this product.
P-T1750HTransformer - Hammond, Output replacement for Fender, 20W 6.6kΩ
Replacement for Deluxe, Deluxe Reverb
Equivalent to manufacturer part number #125A1A & #022640
Warning: Not all amplifier models of the same name use the same transformer model.
$34.95
Click to read more about this product.
P-TF22848Transformer - Fender® Replacement, Output, 35 W, 4 Ohm
Replacement for Pro Reverb, Tremolux, Vibrolux, Bandmaster, and Vibroverb, 4 ohms.

Equivalent to #125A6A & #022848.
$39.95
Click to read more about this product.

Pages

(36 pages)
Subscribe to RSS - Transformers & Chokes