Transistors

2N5088 NPN Bipolar Junction Transistor in TO-92 package

BC108 NPN silicon transistors. The BC108 is a popular NPN choice for fuzz pedals and other effects such as vintage silicon Fuzz Face builds and Big Muff clones. Type hFE (IC=2mA, VCE=5V) hfe (IC=2mA, VCE=5V, f=1KHz) BC108A 110-220 125-260 BC108B 200-450 240-500 BC108C 420-800 450-900

• NPN polarity
• Collector emitter breakdown voltage 25V
• Collector base breakdown voltage 30V
• Collector current 200mA
• Power 0.75W
• Transition frequency 150MHz
• TO-18 case
• Weight 0.35g

The BC183 is a general purpose NPN transistor in a TO-92 case. The BC183 is commonly used in fuzz pedals and has a reputation as a warm sounding silicon transistor for fuzz. The BC183 is available in three different gain ranges: BC183A, BC183B, and BC183C. Type hfe (IC=2mA, VCE=5V, f=1KHz) BC183A 125-260 BC183B 240-500 BC183C 450-900

Surface mount MMBFJ201 JFET. Commonly used in place of the discontinued through-hole J201. These JFETs can be found in many effects pedals, synthesizers, and other projects. The MMBFJ201 is an N-Channel general purpose amplifier JFET. This device is designed primarily for low level audio and general purpose applications with high impedance signal sources.

The BC184 is a general purpose NPN transistor in a TO-92 case. The BC184 is commonly used in fuzz pedals and has a reputation as a warm sounding silicon transistor for fuzz. BC184 was used in various Colorsound pedals - Jumbo Tone Bender, Supa Tone Bender, Power Boost, etc. It was also used in the Schaller Fuzz, and has been used in fuzz pedals from well-known builders such as Skreddy Pedals, D*A*M, and Stu Castledine.

High quality TO package transistor sockets by Mill-Max. These machine pin sockets make swapping transistors in pedals and other projects a simple process. These use a standard TO footprint so they are ready for use on PCBs with matching footprints.

The 2N2222A is a NPN transistor in a TO-18 metal case. The 2N2222A is commonly used in fuzz pedals.

NPN low noise transistor (TO-92 package) - designed for high gain, low noise general purpose amplifier applications.

• Max collector to emitter voltage = 45 V
• Max collector to base voltage = 45 V
• Max emitter to base voltage = 6.5 V
• Max collector current = 0.2 A (continuous)

General purpose low-power NPN bipolar junction transistor, used frequently in hobbyist electronic projects.

2N404A PNP germanium transistors. The 2N404A is used in many fuzz pedals along with other effects. The 2N404A is the same as the 2N404 but with a higher voltage rating. This transistor is in a TO-5 package with long leads commonly found on germanium transistors. For a lower voltage version of this transistor, see P-Q2N404.

2N404 PNP germanium transistors. The 2N404 is used in many fuzz pedals along with other effects. This transistor is in a TO-5 package with long leads commonly found on germanium transistors. For a higher voltage version of this transistor, see P-Q2N404A.

High quality single row machine pin sockets made by Preci-Dip. These sockets are the break-away type and can easily snap into smaller sizes such as 5 separate transistor sockets.

New old stock 2N3565 transistors manufactured by Micro Electronics. The 2N3565 is a silicon NPN transistor in a TO-106 case. The 2N3565 is primarily intended for general purpose and low level applications. 2N3565 transistors were used in the original Harmonic Percolator, Foxx Tone Machine and the Sam Ash Fuzzz Boxx.

BC109 NPN silicon transistors. The BC109 is a popular NPN choice for fuzz pedals and other effects such as vintage silicon Fuzz Face builds and Big Muff clones. Type hFE (IC=2mA, VCE=5V) hfe (IC=2mA, VCE=5V, f=1KHz) BC109B 200-450 240-500 BC109C 420-800 450-900

General purpose low level, low noise amplifier. Silicon NPN transistor.

2SD77 NPN germanium transistors. The 2SD77 is a popular NPN for fuzz pedals and other effects. The NPN polarity allows for use with standard pedal power supplies.

2N5457 N-Channel JFET in a TO-92 package. The 2N5457 is designed primarily for audio and switching applications.

• Max drain to gate voltage = 25 V
• Max gate to source voltage = -25 V
• Max forward gate current = 10 mA

Surface mount MMBFJ201 JFETs presoldered to TO-92 adapter boards. Use wire, clipped component leads, or pin headers to easily attach these adapters to PCBs using TO-92 footprints for J201s. These JFETs can be found in many effects pedals, synthesizers, and other projects. The J201 / MMBFJ201 is an N-Channel general purpose amplifier JFET. This device is designed primarily for low level audio and general purpose applications with high impedance signal sources. The pinout is marked on the PCB and is DSG when facing the component side.

2N2222A in a TO-92 package. The 2N2222A is a NPN transistor commonly used in fuzz pedals. Typical Applications:

• Signal processing
• Switching
• Amplification

2N169 NPN germanium transistors in an oval package. The oval package is sometimes referred to as a top hat package. The 2N169 is a popular NPN for fuzz pedals and other effects. The NPN polarity allows for use with standard pedal power supplies.

The 2N5135 is a silicon NPN transistor in a TO-105 case. This transistor is a close match to the rare 2N5133 but with higher voltage ratings and is in a larger package. The hFE range is less wide than the 2N5133 with more values in the range found in the batches used on vintage Big Muff pedals. The lower hFE range also makes these a great option for silicon fuzz pedals.

PF5102 N-Channel Switch (TO-92 package) - designed for low level analog switching, sample and hold circuits and chopper stabilized amplifiers.

• Max drain to gate voltage = 40 V
• Max gate to source voltage = -40 V
• Max forward gate current = 50 m

The BC547 is a silicon general purpose NPN transistor in a TO-92 package. The BC547’s typical applications include signal processing, amplification, and switching. The BC547 is available in two different gain ranges: BC547B and BC547C. Type hFE (IC=2mA, VCE=5V) BC547B 200-450 BC547C 420-800

J113 N-Channel Switch (TO-92 package) - designed for low level analog switching, sample and hold circuits and chopper stabilized amplifiers.

• Max drain to gate voltage = 35 V
• Max gate to source voltage = -35 V
• Max forward gate current = 50 mA