Transistors

15 A, 60 V, 115 W
EPIBASE - Designed for power amplifier and switching regulator applications. The best choice where high frequency response, low switching losses and good safe operating area are required.

• Current Gain - Bandwidth Product - fT = 2.5 MHz (Min) @ Ic = 1.0 Adc
• Safe Operating Area - Full Power Rating to 40 V

2N1309 PNP germanium transistors. The 2N1309 is a popular PNP for fuzz pedals and other effects. This transistor is in a TO-5 package with long leads commonly found on germanium transistors.

2N2614 PNP germanium transistors. The 2N2614 is a popular PNP for fuzz pedals and other effects. The 2N2614 was popularly used in the Maestro Fuzz Tone FZ-1a pedal.

J113 N-Channel Switch (TO-92 package) - designed for low level analog switching, sample and hold circuits and chopper stabilized amplifiers.

• Max drain to gate voltage = 35 V
• Max gate to source voltage = -35 V
• Max forward gate current = 50 mA

Surface mount MMBFJ201 JFETs presoldered to TO-92 adapter boards. Use wire, clipped component leads, or pin headers to easily attach these adapters to PCBs using TO-92 footprints for J201s. These JFETs can be found in many effects pedals, synthesizers, and other projects. The J201 / MMBFJ201 is an N-Channel general purpose amplifier JFET. This device is designed primarily for low level audio and general purpose applications with high impedance signal sources. The pinout is marked on the PCB and is DSG when facing the component side.

OC141 NPN germanium transistors. The OC141 is a popular NPN for fuzz pedals and boost effects. This transistor is in a glass SO-2 package with long leads commonly found on germanium transistors. The NPN polarity allows for use with standard pedal power supplies. The dot indicates the collector lead.

AF101 PNP germanium transistors made by Telefunken. The AF101 is a PNP transistor recommended for mixer and IF stages and works well in effects that use germanium transistors such as fuzz and boost pedals. This transistor is in a unique SO-2 package and features the long leads commonly found on germanium transistors.

The 2N5135 is a silicon NPN transistor in a TO-105 case. This transistor is a close match to the rare 2N5133 but with higher voltage ratings and is in a larger package. The hFE range is less wide than the 2N5133 with more values in the range found in the batches used on vintage Big Muff pedals. The lower hFE range also makes these a great option for silicon fuzz pedals.

2N5087 PNP Bipolar Junction Transistor in TO-92 package. For the NPN 2N5087 see P-Q2N5088

The BC549 is a silicon general purpose NPN transistor in a TO-92 package. The BC549’s typical applications include signal processing, amplification, and switching. The BC549 is available in two different gain ranges: BC549B and BC549C. Type hFE (IC=2mA, VCE=5V) BC549B 200-450 BC549C 420-800

The BC183L is a general purpose NPN transistor in a TO-92 case. The BC183L is commonly used in fuzz pedals and has a reputation as a warm sounding silicon transistor for fuzz. The BC183L was used in some of the earliest silicon Fuzz Face pedals. The ECB pinout matches the arrangement on the P-PC-FUZZ-ISS2-BRN Iss. 2 PCB

• NPN polarity
• Collector emitter breakdown voltage 30V
• Collector base breakdown voltage 45V
• Collector current 100mA
• Power 1W
• Transition frequency 120MHz
• TO-92 case

2N527 PNP germanium transistors. The 2N527 is a popular PNP for fuzz pedals and other effects. It can be found in modern classics such as the Sunface and Benson Fuzz. This transistor is in a TO-5 package with long leads commonly found on germanium transistors.

The BC182 is a general purpose NPN transistor in a TO-92 case. The BC182 is commonly used in fuzz pedals and has a reputation as a warm sounding silicon transistor for fuzz. The BC182 has a more narrow hFE range than the BC183 which can be helpful for certain builds.

2N2222A in a TO-92 package. The 2N2222A is a NPN transistor commonly used in fuzz pedals. Typical Applications:

• Signal processing
• Switching
• Amplification

AC162 PNP germanium transistors made by Siemens. The AC162 is a popular PNP transistor among fuzz builders and is a great option for effects that use germanium transistors. This transistor is in a TO-1 package that is unique to Siemens transistors and features the long leads commonly found on germanium transistors.

The BC209C is a silicon NPN transistor in a TO-106 case. The BC209C is primarily intended for general purpose audio applications. BC209C transistors were used in original silicon Fuzz Face® pedals as well as a variety of D*A*M pedals.

2N5458 N-channel JFET in a TO-92 package. The 2N5458 is an N−channel junction field effect transistors, depletion mode (Type A), designed for audio and switching applications. Features

• N−Channel for Higher Gain
• Drain and Source Interchangeable
• High AC Input Impedance
• High DC Input Resistance
• Low Transfer and Input Capacitance
• Low Cross−Modulation and Intermodulation Distortion

2N5485 N-channel JFET in a TO-92 package. The 2N5485 is an N−channel junction field effect transistors designed for RF amplifier and mixer applications. These devices operate well in the VHF/UHF frequency range.

2N1308 NPN germanium transistors. The 2N1308 is a popular NPN for fuzz pedals and other effects. This transistor is in a TO-39 package.

SFT353 PNP germanium transistors. The SFT353 is a popular PNP for fuzz pedals and other effects. This transistor is in a 18B4 package with long leads commonly found on germanium transistors. This style of package can be found in Italian built Vox Tonebenders.

BC238B NPN transistor in a TO-92 package. The BC238 is used in a variety of vintage pedals such as the Schaller Fuzz, a version of the Brian May treble boost,and later Jen / Tonebender fuzz pedals. The BC238B is a variant of the BC108B and works well in other classic fuzz pedals such as Fuzz Face and Big Muff builds.

2N7000 N-channel enhancement mode field effect transistors. 2N7000 MOSFETs are used in many DIY projects such as boost and distortion effects pedals.
Features:

• Voltage Controlled Small Signal Switch
• High Saturation Current Capability
• Rugged and Reliable
• High Density Cell Design for Low RDS(ON)
  

Peavey's direct replacement for the SJE 5332. The MJE253G PNP transistor is rated 120V, 3A, and comes in a Case-77 package.

The 2N3392 is a general purpose NPN transistor in a TO-92 case. The 2N3392 is used in some original silicon Fuzz Face pedals as well as the Brassmaster fuzz.