Transistors

15 A, 60 V, 115 W
EPIBASE - Designed for power amplifier and switching regulator applications. The best choice where high frequency response, low switching losses and good safe operating area are required.

• Current Gain - Bandwidth Product - fT = 2.5 MHz (Min) @ Ic = 1.0 Adc
• Safe Operating Area - Full Power Rating to 40 V

2N5087 PNP Bipolar Junction Transistor in TO-92 package. For the NPN 2N5087 see P-Q2N5088

2N527 PNP germanium transistors. The 2N527 is a popular PNP for fuzz pedals and other effects. It can be found in modern classics such as the Sunface and Benson Fuzz. This transistor is in a TO-5 package with long leads commonly found on germanium transistors.

2N1309 PNP germanium transistors. The 2N1309 is a popular PNP for fuzz pedals and other effects. This transistor is in a TO-5 package with long leads commonly found on germanium transistors.

BC238B NPN transistor in a TO-92 package. The BC238 is used in a variety of vintage pedals such as the Schaller Fuzz, a version of the Brian May treble boost,and later Jen / Tonebender fuzz pedals. The BC238B is a variant of the BC108B and works well in other classic fuzz pedals such as Fuzz Face and Big Muff builds.

2N5485 N-channel JFET in a TO-92 package. The 2N5485 is an N−channel junction field effect transistors designed for RF amplifier and mixer applications. These devices operate well in the VHF/UHF frequency range.

Surface mount MMBFJ201 JFET. Commonly used in place of the discontinued through-hole J201. These JFETs can be found in many effects pedals, synthesizers, and other projects. The MMBFJ201 is an N-Channel general purpose amplifier JFET. This device is designed primarily for low level audio and general purpose applications with high impedance signal sources.

SFT353 PNP germanium transistors. The SFT353 is a popular PNP for fuzz pedals and other effects. This transistor is in a 18B4 package with long leads commonly found on germanium transistors. This style of package can be found in Italian built Vox Tonebenders.

The BC182 is a general purpose NPN transistor in a TO-92 case. The BC182 is commonly used in fuzz pedals and has a reputation as a warm sounding silicon transistor for fuzz. The BC182 has a more narrow hFE range than the BC183 which can be helpful for certain builds.

The BC209C is a silicon NPN transistor in a TO-106 case. The BC209C is primarily intended for general purpose audio applications. BC209C transistors were used in original silicon Fuzz Face® pedals as well as a variety of D*A*M pedals.

Low noise transistor for audio frequency amplifier applications. Features:

• Switching and amplifier
• Low Noise
• Compliment to P-QBC560

The BC549 is a silicon general purpose NPN transistor in a TO-92 package. The BC549’s typical applications include signal processing, amplification, and switching. The BC549 is available in two different gain ranges: BC549B and BC549C. Type hFE (IC=2mA, VCE=5V) BC549B 200-450 BC549C 420-800

The BC560 is a silicon general purpose PNP transistor in a TO-92 package. The BC560’s typical applications include signal processing, amplification, and switching.

The 2N1711 is a silicon planar epitaxial NPN transistor in a TO-39 metal case. It is intended for use in high performance amplifiers, oscillators and switching circuits. The 2N1711 is a great choice for amplifiers where low noise is an important factor.

MOSFET BS170 N-Channel Transistor. Used in MOD® Kits.
Note - this is a fragile component! Use caution not to overheat or break leads.

J113 N-Channel Switch (TO-92 package) - designed for low level analog switching, sample and hold circuits and chopper stabilized amplifiers.

• Max drain to gate voltage = 35 V
• Max gate to source voltage = -35 V
• Max forward gate current = 50 mA

MPSA14 NPN Darlington transistor (TO-92 package) - designed for high gain, low noise general purpose amplifier applications.

• Max collector to emitter voltage = 30 V
• Max collector to base voltage = 30 V
• Max emitter to base voltage = 10 V
• Max collector current = 0.5 A (continuous)

The BC183A transistors manufactured by ITT. The BC183A is a general purpose NPN transistor in a TO-92 case. It is commonly used in fuzz pedals and has a reputation as a warm sounding silicon transistor for fuzz. A version of the BC183A, the BC183KA can be found in some vintage Fuzz Face pedals.

Low noise transistor for audio frequency amplifier applications.

2N5458 N-channel JFET in a TO-92 package. The 2N5458 is an N−channel junction field effect transistors, depletion mode (Type A), designed for audio and switching applications. Features

• N−Channel for Higher Gain
• Drain and Source Interchangeable
• High AC Input Impedance
• High DC Input Resistance
• Low Transfer and Input Capacitance
• Low Cross−Modulation and Intermodulation Distortion

2N7000 N-channel enhancement mode field effect transistors. 2N7000 MOSFETs are used in many DIY projects such as boost and distortion effects pedals.
Features:

• Voltage Controlled Small Signal Switch
• High Saturation Current Capability
• Rugged and Reliable
• High Density Cell Design for Low RDS(ON)
  

The 2N3392 is a general purpose NPN transistor in a TO-92 case. The 2N3392 is used in some original silicon Fuzz Face pedals as well as the Brassmaster fuzz.

SFT319 PNP germanium transistors. The SFT319 is a popular PNP for fuzz pedals and other effects. This transistor is in a 18B4 package with long leads commonly found on germanium transistors. This style of package can be found in Italian built Vox Tonebenders.

J201 N-Channel JFET in a TO-92 package. The J201 is designed primarily for low level audio and general purpose applications with high impedance signal sources.

• Max drain to gate voltage = 40 V
• Max gate to source voltage = -40 V
• Max forward gate current = 50 mA