Transistors

Peavey's direct replacement for the SJE 5331. The MJE243G NPN transistor is rated 120V, 3A, and comes in a Case-77 package.

The 2N2484 is a silicon planar epitaxial NPN transistor in a TO-18 metal case type. The 2N2484 is primarily intended for use in high performance, low level, low noise amplifier applications.

Peavey's direct replacement for the SJE 5332. The MJE253G PNP transistor is rated 120V, 3A, and comes in a Case-77 package.

15 A, 60 V, 115 W
EPIBASE - Designed for power amplifier and switching regulator applications. The best choice where high frequency response, low switching losses and good safe operating area are required.

• Current Gain - Bandwidth Product - fT = 2.5 MHz (Min) @ Ic = 1.0 Adc
• Safe Operating Area - Full Power Rating to 40 V

The BC181 is a general purpose PNP transistor manufactured by Texas Instruments. This low-power PNP bipolar junction transistor is in a TO-92 case.

The AS3046 is Alfa’s version of the CA3046 (LM3046) IC. The AS3046 consists of five general purpose silicon NPN transistors on a common monolithic substrate. Two of the transistors are internally connected to form a differentially-connected pair. The transistors are well suited to a wide variety of applications in low power systems. They may be used as discrete transistors in conventional circuits however, in addition, they provide the very significant inherent integrated circuit advantages of close electrical and thermal matching. The AS3046 is available in a 14-pin DIP package. Features

• Matched pair of npn transistors
• VBE matched less than ±1 mV
• 5 general purpose monolithic transistors
• Wide operating current range

Applications

• Filters
• Custom designed differential amplifiers
• Temperature compensated amplifiers

The BD139 is a NPN medium power BJT transistor in a TO-126 package. The BD139's typical applications include audio amplifiers and drivers but is also popularly used in silicon fuzz pedals. The BD139 is available in two different gain ranges: BD139-10 and QBD139-16. Type hFE (IC=150mA, VCE=2V) BD139-10 63-160 BD139-16 100-250

J201 N-Channel JFET in a TO-92 package made by Siliconix. The J201 is designed primarily for low level audio and general purpose applications with high impedance signal sources.

• Max drain to gate voltage = 40 V
• Max gate to source voltage = -40 V
• Max forward gate current = 50 mA

Transistor MJ15022, TO-3 Case, NPN PowerBase power transistors designed for high power audio, disk head positioners and other linear applications. Features

• High Safe Operating Area (100% Tested) −2 A @ 80 V
• High DC Current Gain − hFE = 15 (Min) @ IC = 8 Adc

The 2N708 is a silicon NPN transistor in a TO-18 metal case type. The 2N708 is primarily intended for use in high speed switching and VHF amplification applications.

The AS194H is a junction isolated ultra well-matched monolithic NPN transistor pair with an order of magnitude improvement in matching over conventional transistor pairs. Electrical characteristics of these devices such as drift versus initial offset voltage, noise, and the exponential relationship of base-emitter voltage to collector current closely approach those of a theoretical transistor. Extrinsic base and emitter resistances are very low, giving very low noise and operating over a wide current range. To guarantee long term stability of matching parameters, internal clamp diodes have been added across the emitter-base junction of each transistor. These prevent degradation due to reverse biased emitter current, the most common cause of field failures in matched devices.

J112 N-Channel JFET in a TO-92 package. Designed for low level analog switching, sample and hold circuits and chopper stabilized amplifiers.

The BC337 is a silicon general purpose NPN transistor in a TO-92 package. The BC337’s typical applications include signal processing, amplification, and switching. The BC337 is available in three different gain ranges: BC337-16, BC337-25, and BC337-40. Type hFE Range (IC=100mA, VCE=1V) Typical hFE (IC=100mA, VCE=1V) BC337-16 100-250 160 BC337-25 160-400 250 BC337-40 250-630 400

2N6027 programmable unijunction transistor often referred to as a PUT. The 2n6027 can be found in many tremolo effects pedal projects.

2SC945 NPN transistors. This is a silicon NPN transistor in a TO-92 package. The 2SC945 was used in many classic Boss pedals such as the CE-2 chorus.

The 2N5172 is a silicon general purpose NPN transistor in a TO-92 package. The 2N5172’s typical applications include general purpose amplification and switching.

2N5400 (761), PNP general purpose amp, 120V, 10mA, TO-92 case.

The AS3046 is Alfa’s version of the CA3046 IC in an SOIC package. The AS3046D consists of five general purpose silicon NPN transistors on a common monolithic substrate. Two of the transistors are internally connected to form a differentially-connected pair. The transistors are well suited to a wide variety of applications in low power systems. They may be used as discrete transistors in conventional circuits however, in addition, they provide the very significant inherent integrated circuit advantages of close electrical and thermal matching. The AS3046D is available in a 14-pin SOIC package. Features

• Matched pair of npn transistors
• VBE matched less than ±1 mV
• 5 general purpose monolithic transistors
• Wide operating current range

Applications

• Filters
• Custom designed differential amplifiers
• Temperature compensated amplifiers

General purpose low-power PNP bipolar junction transistor, used frequently in hobbyist electronic projects. This version is lead free.
For a lead free 2N3904 see P-Q2N3904-LF.

MPS 6533, PNP general purpose amp, 40V, TO-92 Case.
Note: Peavey is now using MPS6534 in place of the MPS6533.

The TIP47 power transistor is intended for use in linear and switching applications. This series is designed for line operated audio output amplifiers, switchmode power supply drivers and other switching applications.

The BC548 is a silicon general purpose NPN transistor in a TO-92 package. The BC548’s typical applications include signal processing, amplification, and switching. The BC548 is available in two different gain ranges: BC548B and BC548C. Type hFE (IC=2mA, VCE=5V) BC548B 200-450 BC548C 420-800

The AS394H is a junction isolated ultra well-matched monolithic NPN transistor pair with an order of magnitude improvement in matching over conventional transistor pairs. Electrical characteristics of these devices such as drift versus initial offset voltage, noise, and the exponential relationship of base-emitter voltage to collector current closely approach those of a theoretical transistor. Extrinsic base and emitter resistances are very low, giving very low noise and operating over a wide current range. To guarantee long term stability of matching parameters, internal clamp diodes have been added across the emitter-base junction of each transistor. These prevent degradation due to reverse biased emitter current, the most common cause of field failures in matched devices.

BC149C NPN transistor in a rare Mullard Lockfit package. The BC149C is the equivalent of a BC109C but in the Lockfit package rather than a TO-18. The BC149C was used in a variety of audio and radio equipment and works well for fuzz and other effects. It can be found in the Brian May treble boost and the Electrolabs Fuzz.