Transistors

PF5102 N-Channel Switch (TO-92 package) - designed for low level analog switching, sample and hold circuits and chopper stabilized amplifiers.

• Max drain to gate voltage = 40 V
• Max gate to source voltage = -40 V
• Max forward gate current = 50 m

Surface mount MMBFJ201 JFET. Commonly used in place of the discontinued through-hole J201. These JFETs can be found in many effects pedals, synthesizers, and other projects. The MMBFJ201 is an N-Channel general purpose amplifier JFET. This device is designed primarily for low level audio and general purpose applications with high impedance signal sources.

Transistor MJ15015, TO-3 Case, NPN
PowerBase complementary transistors designed for high power audio, stepping motor and other linear applications. These devices can also be used in power switching circuits such as relay or solenoid drivers, dc–to–dc converters, inverters, or for inductive loads requiring higher safe operating areas.
Safe Operating Area - Rated to 60V

Transistor MJ15022, TO-3 Case, NPN PowerBase power transistors designed for high power audio, disk head positioners and other linear applications. Features

• High Safe Operating Area (100% Tested) −2 A @ 80 V
• High DC Current Gain − hFE = 15 (Min) @ IC = 8 Adc

Transistor MJ15023, TO-3 Case, PNP
PowerBase power transistors designed for high power audio, disk head positioners and other linear applications.
Features

• High Safe Operating Area (100% Tested) −2 A @ 80 V
• High DC Current Gain − hFE = 15 (Min) @ IC = 8 Adc

Transistor MJ15025, TO-3 Case The MJ15025 is a power transistor designed for high-power audio, disk head positioners, and other linear applications Features:

• High Safe Operating Area: -2A @ 80 V
• High DC Current Gain hFE = 15 (Min) @ IC = 8 Adc

MOSFET BS170 N-Channel Transistor. Used in MOD® Kits.
Note - this is a fragile component! Use caution not to overheat or break leads.

MPF102 N-Channel JFET in a TO-92 package. The MPF102 is designed for electronic switching applications such as low ON resistance analog switching.

• Max drain to gate voltage = 25 V
• Max gate to source voltage = -25 V
• Max forward gate current = 10 mA

NPN Darlington transistor (TO-92 package) - designed for applications requiring extremely high current gain at collector currents to 1.0A.

• Max collector to emitter voltage = 30 V
• Max collector to base voltage = 30 V
• Max emitter to base voltage = 10 V
• Max collector current = 1.2 A (continuous)

MPSA14 NPN Darlington transistor (TO-92 package) - designed for high gain, low noise general purpose amplifier applications.

• Max collector to emitter voltage = 30 V
• Max collector to base voltage = 30 V
• Max emitter to base voltage = 10 V
• Max collector current = 0.5 A (continuous)

NPN low noise transistor (TO-92 package) - designed for high gain, low noise general purpose amplifier applications.

• Max collector to emitter voltage = 45 V
• Max collector to base voltage = 45 V
• Max emitter to base voltage = 6.5 V
• Max collector current = 0.2 A (continuous)

MPSA63 PNP Darlington transistor (TO-92 package) - designed for high gain, low noise general purpose amplifier applications.

• Max collector to emitter voltage = -30V
• Max collector to base voltage = -30 V
• Max emitter to base voltage = -10 V
• Max collector current = -0.5 A (continuous)

MPSA63 PNP Darlington transistor (TO-92 package) - designed for high gain, low noise general purpose amplifier applications.

• Max collector to emitter voltage = -30V
• Max collector to base voltage = -30 V
• Max emitter to base voltage = -10 V
• Max collector current = -0.5 A (continuous)

New old stock 2N3565 transistors manufactured by Micro Electronics. The 2N3565 is a silicon NPN transistor in a TO-106 case. The 2N3565 is primarily intended for general purpose and low level applications. 2N3565 transistors were used in the original Harmonic Percolator, Foxx Tone Machine and the Sam Ash Fuzzz Boxx.

New old stock 2N404A PNP germanium transistors manufactured by Texas Instruments. These TI 2N404A feature gold plated leads. The 2N404A is used in many fuzz pedals along with other effects. The 2N404A is the same as the 2N404 but with a higher voltage rating. This transistor is in a TO-5 package with long leads commonly found on germanium transistors.

OC139 NPN germanium transistors. The OC139 is a popular NPN for fuzz pedals and boost effects. This transistor is in a glass SO-2 package with long leads commonly found on germanium transistors. The NPN polarity allows for use with standard pedal power supplies. The dot indicates the collector lead. The OC139 can be found in the EarthQuaker Devices Bows germanium preamp.

OC43 PNP germanium transistors. The OC43 is a popular PNP for fuzz pedals and boost effects. This transistor is in a glass SO-2 package with long leads commonly found on germanium transistors. The dot indicates the collector lead.

Adzam (Mazda) brand OC45 PNP germanium transistors. The OC45 is a popular PNP for fuzz pedals and boost effects. This transistor is in a glass SO-2 package with long leads commonly found on germanium transistors. The dot indicates the collector lead.

Valvo brand OC45 PNP germanium transistors. The OC45 is a popular PNP for fuzz pedals and boost effects. This transistor is in a glass SO-2 package with long leads commonly found on germanium transistors. The dot indicates the collector lead.

OC46 PNP germanium transistors. The OC46 is a popular PNP for fuzz pedals and boost effects. It can be found in vintage electronics and modern fuzz pedals. This transistor is in a black glass SO-2 package with long leads commonly found on germanium transistors.

2N5400 (761), PNP general purpose amp, 120V, 10mA, TO-92 case.

Peavey's direct replacement for the SJE 5331. The MJE243G NPN transistor is rated 120V, 3A, and comes in a Case-77 package.

Peavey's direct replacement for the SJE 5332. The MJE253G PNP transistor is rated 120V, 3A, and comes in a Case-77 package.

MPS 6531, NPN general purpose amp, 40V, TO-92 Case.