Vacuum Tube Accessories

Socket - 9 Pin, Miniature, Plastic, PC Mount
9-pin plastic tube socket commonly used for preamp tubes or EL84 power tubes.
  • Standoff, PC mount
  • 3/4” tail diameter
$1.88
Tube Shield - High Quality, Fits P-ST9-700 with Spring
New production, aluminum, 2" tall, for use with P-ST9-700 and P-ST9-700-PC.
$1.95
Vacuum Tube Retainer - Belton, for EL84s, High Quality
Retainer (Belton). for use with EL84 tubes, mounts to chassis. Steel plate with nickel plating and natural coil spring. Note: these retainers are for specialized socket below chassis mounting. (See mounting drawing below.) The springs are too short for standard sockets mounted level with the chassis surface.
$1.95
Tube Clip - Octal, Sold individually
Vacuum tube base clip. Grips tube base with teeth to securely hold tube in place. For use with octal sockets with 1-½" mounting centers.
$1.95
Tube Clip - Belton, for Octal, sold individually
Grips tube base with 'teeth' to securely hold tube in place. For use with octal sockets with 1-1/2" mounting centers. Super high quality. Spring plate with Nickel plating. Please Note: This tube clip will not work with socket P-ST8-500
$1.95
Socket - 9 Pin, Ceramic, PC Mount, bottom or PC mount
9-pin ceramic tube socket commonly used for preamp tubes or EL84 power tubes
  • Bottom, PC mount
  • ¾” chassis hole required
  • ¾” tail diameter
Starting at $2.15
Socket - 8 Pin Octal, Ceramic, with Separate Retaining Ring
8-pin ceramic tube socket commonly used for octal based power, preamp, and rectifier tubes. Great replacement for Fender, Marshall and others.
  • Convenient top or bottom mount capabilities
  • Includes mounting bracket
  • Spade type pins
  • 1-1/16” to 1-1/8” chassis hole required
  • 1-7/16” oblong mounting centers
$2.19
Socket - 9 Pin, Standoff Ceramic PC Mount
9-pin ceramic tube socket with stand-off mounting. commonly used for preamp tubes or EL84 power tubes.
  • Standoff, PC mount
  • 0.822” outer diameter
  • 3/4” tail diameter
$2.19
Socket - 9 Pin, Ceramic, PC Mount, with center shield
9-pin ceramic tube socket with center shield lug and PC pins commonly used for preamp tubes or EL84 power tubes
  • PC mount
  • 7/8” chassis hole required
  • ⅞" tail diameter
$2.19
Socket - 9 Pin, Miniature, Ceramic PC, China
9-pin ceramic tube socket commonly used for preamp tubes or EL84 power tubes
  • PC mount
  • 13/16” tail diameter
  • Available with standard or gold pins
Starting at $2.19
Socket - 9 Pin, Miniature, Standoff Ceramic PC Mount
9-pin ceramic PC mount tube socket commonly used for preamp tubes or EL84 power tubes
  • Standoff, PC mount
  • 0.70” outer diameter
  • 3/4” tail diameter
$2.19
Vacuum Tube Retainer - for EL84 Tubes
Tube retainer for EL84. for use with guitar amps and applications where the tube is suspended upside down in the chassis. Supports a maximum tube height of 2.8 inches
$2.42
Socket - 9 Pin, for Auto-Wave Soldering, Made in China
9-pin Micalex ceramic tube socket for auto-wave soldering applications.
Measurements:
  • Center PCB hole diameter -0.73"
  • Mounting pin diameters - (9 holes at 1.00") and (3 holes at 1.26")
$2.44
Socket - 8 Pin Octal, ⅞" Fits in 1" Hole with Bracket PC Mount
Ceramic Tube socket used for octal power tubes, PC mount
  • Chassis hole: 1” to 1-1/4” depending on mounting (Top: 1” to 1-1/8”, Bottom: 1-1/4”)
  • Mounting Centers: 1-1/2” with oblong mounting holes
  • PC mount pins
$2.44
Socket - 8 Pin Octal, Ceramic PC Mount
8-pin ceramic stand-off tube socket commonly used for octal based power, preamp, and rectifier tubes.
  • PC mount
  • 1” tail diameter
  • Available with standard or gold pins
Starting at $2.44
Socket - 9 Pin, Miniature, with Shielded Base
9-pin phenolic tube socket with attached shield base.
  • Top mount
  • 3/4” chassis hole required
  • 1-1/8” mounting centers

Please Note: Tube retainer S-H144 will not work with this socket
$2.45
Socket - 7 Pin, Miniature, Standoff Ceramic PC Mount
7-pin ceramic tube socket with PC pins commonly used for tubes such as the 6X4 rectifier.
  • PC mount
  • 11/16” chassis hole required
  • 11/16" tail diameter
$2.45
Socket - 7 Pin, Miniature, Ceramic with Mounting Ring
Ceramic 7-pin socket with center shield and mounting bracket.
  • Convenient top or bottom mounting capabilities
  • 5/8” chassis hole required
  • 7/8” mounting centers
$2.45
Socket - 8 Pin Octal, Ceramic, top or bottom mount
8-pin ceramic tube socket commonly used for octal based power, preamp, and rectifier tubes. Can be top mounted or bottom mounted, using unique ring mount. Great replacement for Fender, Marshall and others.
  • Convenient top or bottom mount capabilities
  • Includes mounting bracket
  • 1-1/16” to 1-1/8” chassis hole required
  • 1-7/16” oblong mounting centers
$2.59
Tube Shield - 2", Chinese manufacture
2" tall, for use with P-ST9-AWS or P-ST9-AWS-CHINA
$2.60
Vacuum Tube Retainer - for 12AX7 Tubes
Mounting Centers = 1", Overall Height = 2.2". Keeps common preamp tubes in place while dampening vibrations to reduce microphonics. Supports a maximum tube height of 2.1 inches
$2.65
Turret Strip - Socket Mount , Gold Plated Copper, Single Row
Single row turret strips with a tab for mounting directly to tube socket mounting holes. The screw mount turrets are made of gold plated brass and are pre-mounted to the 2mm thick boards. The mounting hole is 0.15” in diameter. These turret strips are a great option for components connecting to the socket lugs of point to point builds.
Starting at $2.65
Socket - Belton, 9 Pin, for Auto-Wave Soldering
Belton 9-pin tube socket specifically designed for auto-wave soldering. Applicable for all types of electronic equipment using vacuum tubes.
  • 3/4” PC hole
  • 1-1/8” mounting centers

Features:
  • Safety attachment with 3 positions of mounting pins
  • Easy mount with the precise designed tube pins
  • Glassfiber filled PPS insulating material
$2.75
Socket - 8 pin octal, Sleeve Connectors, 1" with Bracket
Ceramic Tube socket used for octal power tubes.
  • Chassis hole: 1” to 1-1/4” depending on mounting (Top: 1” to 1-1/16”, Bottom: 1-1/4”)
  • Mounting Centers: 1-1/2” with oblong mounting holes
$2.75