Vacuum Tube Accessories

9 pin miniature Belton socket. Applicable for use with all types of electric and electronic equipment using vacuum tubes.

• Paddle saddle mounting
• Phosphorous bronze pin terminal with tin plating
• Glassfiber filled PPS Insulating material
• Easy mount with collar attached socket
• 1-⅛" mounting centers
• Fits ¾" chassis hole
• Top mount

Belton Micalex tube socket used for 9 pin miniature tubes, bottom mount. Applicable for use with all types of electric and electronic equipment using vacuum tubes.

• Chassis hole: ¾”
• Mounting Centers: 1-1/8”
• Bottom mount

Features:

• Paddle saddle mounting
• Phosphorous bronze pin terminal with tin plating
• Glassfiber fileld PPS Insulating material
• Easy mount with collar attached socket

9-pin Micalex tube socket commonly used for preamp tubes or EL84 power tubes. Applicable for use with all types of electronic equipment using vacuum tubes.

• Top mount
• 3/4” chassis hole required
• 1” mounting centers

9-pin Micalex tube socket commonly used for preamp tubes or EL84 power tubes. Applicable for use with all types of electronic equipment using vacuum tubes. Features:

• Top mount
• 3/4” tail diameter
• 1-1/8” mounting center

(Belton) Micalex, 9 pin miniature socket with PC pins, stand off mounting. Fits 3/4" chassis hole diameter (bottom mount). Applicable for use with all types of electric and electronic equipment using vacuum tubes. Features:

• Paddle saddle mounting
• Phosphorous bronze pin terminal with tin plating
• Glassfiber fileld PPS Insulating material
• Easy mount with collar attached socket

Belton micalex tube socket commonly used for preamp tubes or EL84 power tubes

• Fits ¾" chassis hole diameter
• See P-SS9-400 for a compatible tube shield

Belton 9-pin tube socket, crimped with shield base. Applicable for use with all types of electronic equipment using vacuum tubes.

• Top mount, PC pins
• 3/4” tail diameter
• 1-1/8” mounting centers

Features:

• Paddle saddle mounting
• Phosphorous bronze pin terminal with tin plating
• Glassfiber filled PPS Insulating material
• Easy mount with collar attached socket

9 pin miniature socket saver. Commonly used in tube testers. Socket savers absorb the main wear and tear from many tube insertions and removals. It's much easier to replace a worn out socket saver than to replace the original socket.

Belton 9-pin tube socket specifically designed for auto-wave soldering. Applicable for all types of electronic equipment using vacuum tubes.

• 3/4” PC hole
• 1-1/8” mounting centers

Features:

• Safety attachment with 3 positions of mounting pins
• Easy mount with the precise designed tube pins
• Glassfiber filled PPS insulating material

9-pin ceramic tube socket for auto-wave soldering applications.
Measurements:

• Center PCB hole diameter -0.73"
• Mounting pin diameters - (9 holes at 1.00") and (3 holes at 1.26")

9-pin Micalex ceramic tube socket for auto-wave soldering applications.
Measurements:

• Center PCB hole diameter -0.73"
• Mounting pin diameters - (9 holes at 1.00") and (3 holes at 1.26")

9-pin premium ceramic tube socket used for magnoval (EL504/EL519 size) base tubes. Can be top mounted or bottom mounted, using unique ring mount. Great replacement for vintage amplifiers and other equipment.

Replacement foam tube stabilizer for Fender® Hot Rod Deluxe and Hot Rod Deville amps. This foam block slides over the first two preamp tubes. This genuine Fender® replacement is made in the USA.

Do you have valuable octal type tubes that work fine except the keyway has been broken off the base? Fix it with this simple and inexpensive product. Simply clean the remainder of the broken keyway from the base and slip one of these on. Will stay on by itself, or you can use a dab of silicon to attach if you wish.

Steel plates for covering unused socket holes on modified chassis. These covers provide a safe solution for modifying any chassis. These covers use elongated mounting holes to fit a variety of socket hole sizes. P-ST9-CVR

• 9 pin (noval) socket hole cover
• 5mm x 3.5mm mounting holes
• 27.1mm center to center

P-ST8-CVR

• 8 pin (octal) socket hole cover
• 6.5mm x 3.5mm mounting holes
• 40mm center to center

P-ST8-ST9-CNVRT

• 8 pin to 9 pin (octal to noval) socket adapter
• Bottom mount 9 pin socket recommended

Single socket, 2 rows/6 lugs per row, 4 mounting holes. Board dimensions 3" x 3". Terminals are not pre-wired.

Dual socket. 2 rows/12 lugs per row, 4 mounting holes. Board dimensions 5 ¼" x 3". Terminals are not pre-wired.

The YJR is a direct plug-in replacement adapter for use in most amplifiers that use 5AR4/GZ34, 5U4, 5Y3 or similar full-wave rectifier tubes. The YJR converts your amp's vacuum tube rectifier to a solid state rectifier, reducing tube sag for a tighter sound and feel.

15 x 15" egg crate packing box designed for storing tubes. Supplied unassembled. Each size is capable of holding a different number of tubes. For cartons see S-B127X

Cartons to hold tube egg crates S-B123, S-B124, S-B125, and S-B126. All sizes will fit the crates, but you may want additional vertical clearance for taller tubes. See S-B120X for the tube egg crate inserts

Heavy plain white boxes with dividers to cushion tube. Minimum order of 10 per size.

For use with guitar amps and applications where tube is suspended upside down in chassis. Use with suspended 5881, 6L6, and EL34 tubes.

Rubber ring for retainer S-H141 fits EL34/5881 and 6L6GC tubes. Outer Diameter: 1.38" Inner Diameter: 1.00" Thickness: 0.16"

Grips tube base with 'teeth' to securely hold tube in place. For use with octal sockets with 1-1/2" mounting centers. Super high quality. Spring plate with Nickel plating. Please Note: This tube clip will not work with socket P-ST8-500