Vacuum Tube Accessories

Terminal Board - two 9 Pin sockets, 2 x 12 lugs
Dual socket. 2 rows/12 lugs per row, 4 mounting holes. Board dimensions 5 ¼" x 3". Terminals are not pre-wired.
$27.50
Terminal Board - one 8 Pin socket, 2 x 6 lugs
Single socket, 2 rows/6 lugs per row, 4 mounting holes. Board dimensions 3" x 3". Terminals are not pre-wired.
$18.95
Socket Saver - 8-Pin with bracket, for reducing wear and tear
8 pin socket saver with bracket. Commonly used in tube testers. Socket savers absorb the main wear and tear from many tube insertions and removals. It's much easier to replace a worn out socket saver than to replace the original socket.
$11.95
Socket - 4 Pin, Jumbo, Ceramic Bayonet
Colors Available:
4-pin jumbo ceramic bayonet socket used for 211 and 845 tubes.
  • Top mount
  • 2-13/16" mounting centers
  • Available with standard or gold plated pins
Starting at $9.99
Socket Saver - 8-Pin, for reducing wear and tear on tube sockets
8 pin octal socket saver. Commonly used in tube testers. Socket savers absorb the main wear and tear from many tube insertions and removals. It's much easier to replace a worn out socket saver than to replace the original socket.
$9.95
Socket - 8 Pin Ceramic, High Quality
8-pin premium ceramic tube socket commonly used for octal based power, preamp, and rectifier tubes. Can be top mounted or bottom mounted, using unique ring mount. Great replacement for Fender, Marshall and others.
  • Premium quality
  • Convenient top or bottom mount capabilities
  • Includes mounting bracket
  • 1-1/16” chassis hole required
  • 1-7/16” oblong mounting centers
$7.50
Socket - 5 Pin, Ceramic Plate, bottom mount
5-pin ceramic plate socket used for 807 tubes.
  • Bottom mount
  • 1" to 1 ¼" chassis hole required
  • 1 ¾" mounting centers
  • UY-Base, 5 Pins
$5.99
Socket - 7 Pin, Large, Ceramic Plate for 6C33C
7-pin ceramic plate socket used for 6C33B,829B and 3E29 sized tubes. Bossed mounting holes and recessed rivets allow sub-panel mounting .
  • Bottom mount
  • 1 ¼" chassis hole required
  • 1-⅞" x 1-⅞" oblong mounting centers
$5.55
Socket - 8 Pin, Phenolic, MIP, top mount
8-pin phenolic tube socket commonly used for octal based power, preamp, and rectifier tubes.
  • Top mount
  • 1 3/16" to 1 ¼".chassis hole required
  • 1-1/2” mounting centers

*Please Note: The S-H142 tube clip is not compatible with this socket.
$5.50
Socket - 7 Pin, Large, Ceramic for 813, Chinese
7-pin ceramic plate socket used for 813 tubes. Bossed mounting holes and recessed rivets allow sub-panel mounting. Made in China
  • Bottom mount
  • 1 ¼" chassis hole required
  • 1-⅞" x 1-⅞" oblong mounting centers
$5.30
Socket - 8 Pin, Phenolic, top mount
8-pin phenolic tube socket commonly used for octal based power, preamp, and rectifier tubes.
  • Top mount
  • 1” to 1-1/8” chassis hole required
  • 1-1/2” mounting centers
$5.15
Socket - 7 Pin, Ceramic for 1625, bottom mount
7-pin ceramic plate socket used for 1625 tubes. Bossed mounting holes and recessed rivets allow sub-panel mounting .
  • Bottom mount
  • 1”- 1 ¼" chassis hole required
  • 1-13/16” oblong mounting centers
$4.99
Socket - 4 Pin, Ceramic Plate, bottom-mount
Bottom mount ceramic socket has bossed mounting holes and recessed rivets to allow sub-panel mounting. Socket fits 300B, 811 size tubes.
$4.99
Socket - 8 Pin, 1" Chassis Hole, 1-¼" Mounting Centers
8-pin plastic tube socket commonly used for octal based power, preamp, and rectifier tubes.
  • Bottom mount
  • Includes mounting bracket
  • 1” chassis hole required
  • 1 ¼" mounting centers
$4.35
Socket Saver - 9 Pin Miniature, for reducing wear and tear
9 pin miniature socket saver. Commonly used in tube testers. Socket savers absorb the main wear and tear from many tube insertions and removals. It's much easier to replace a worn out socket saver than to replace the original socket.
$4.29
Socket - 8 Pin Octal, Saddle Plate, Black, Bottom Mount
Plastic octal tube socket commonly used for power tubes in many amps.
  • Chassis hole: 1 ⅛"
  • Mounting Centers: 1 ½"
  • Bottom mount
$4.20
Socket - 8 Pin Octal, Saddle Plate, Black, Top Mount
8-pin plastic tube socket commonly used for octal based power, preamp, and rectifier tubes.
  • Top mount
  • 1-1/16” chassis hole required
  • 1 ½" mounting centers
$3.95
Socket - 9 Pin, Ceramic, PC Mount, Gold Pins
9-pin ceramic tube socket with gold pins commonly used for preamp tubes or EL84 power tubes
  • PC mount
  • 7/8” tail diameter
  • Gold pins
$3.89
Socket - Belton, Micalex, 8 Pin, Octal PC Mount, Long Lead
Belton 8-pin Micalex PC mount tube socket with long leads commonly used for octal based power, preamp, and rectifier tubes. Applicable for use with all types of electronic equipment using vacuum tubes.
  • Convenient top or bottom mount capabilities
  • 1-1/4” chassis hole required
  • 1-1/2” oblong mounting centers

Features:
  • Paddle saddle mounting
  • Easy mount with the saddle of extruded screw hole
  • Phosphorous bronze pin terminal with tin plating
  • Glassfiber filled PPS Insulating material
  • Long leads
$3.85
Socket - 9 Pin, ¾" mounting hole, top mount
9-pin Micalex tube socket commonly used for preamp tubes or EL84 power tubes. Applicable for use with all types of electronic equipment using vacuum tubes.
  • Top mount
  • 3/4” chassis hole required
  • 1” mounting centers
$3.69
Socket - 4 Pin, Ceramic, Chassis Mount
4-pin ceramic tube socket.
  • Bottom mount
  • 1-1/4” chassis hole required
  • 1-1/2” mounting centers
$3.55
Socket - Belton, 8 Pin Octal, Micalex, MIP, PC Mount
Belton 8-pin Micalex tube socket commonly used for octal based power, preamp, and rectifier tubes. Applicable for use with all types of electronic equipment using vacuum tubes.
  • Convenient top or bottom, PC mount capabilities
  • 1-1/4” chassis hole required
  • 1-1/2” mounting centers

Features:
  • Paddle saddle mounting
  • Phosphorous bronze pin terminal with tin plating
  • Glassfiber filled PPS Insulating material
  • Easy mount with saddle of extruded screw hole
  • Short leads
$3.50
Socket - Belton, Micalex, 8-Pin Octal, MIP, Flanged Holes
Belton 8-pin Micalex tube socket commonly used for octal based power, preamp, and rectifier tubes. Applicable for use with all types of electronic equipment using vacuum tubes. This version has circular extruded holes.
$3.50
Socket - Belton, 8 Pin, for Auto Wave Soldering
Belton 8-pin tube socket specifically designed for auto-wave soldering .Applicable for all types of electronic equipment using vacuum tubes.
  • 1-3/16” chassis hole required
  • Mounting centers are 1 ½", 1 13/16"

Features:
  • Safety attachment with 3 positions of mounting pins
  • Easy mount with the precise designed tube pins
  • Glassfiber filled PPS insulating material
$3.50