Vacuum Tube Accessories

Tube Stabilizer - Fender®, Hot Rod Series
Replacement foam tube stabilizer for Fender® Hot Rod Deluxe and Hot Rod Deville amps. This foam block slides over the first two preamp tubes. This genuine Fender® replacement is made in the USA.
$9.45
Damper Rings - High Temperature Silicone, Red
High temperature silicone damper / dampener rings great for remedying microphonic oscillations and tube rattle. These red dampening rings are rated for temperatures up to 240°C and come in various sizes to fit a variety of tubes. Please verify your tube sizes to ensure a proper fit.
  • 20mm: Recommended size for 12A_7 (i.e. 12AX7, 12AT7, 12AU7, etc.) types, EL84, or any other tube with a ~20mm diameter.
  • 28mm: Recommended size for 6V6, 6SN7, 5AR4, or any other tube with a ~28mm diameter.
  • 30mm: Recommended size for some EL34, Svetlana EL34, JJ GZ34, Gold Lion KT77, or any other tube with a ~30mm diameter.
  • 32mm: Recommended size for some EL34, 6L6, 6CA7, or any other tube with a ~32mm diameter.
  • 35mm: Recommended size for 6L6GC, 5U4G, 6146B, or any other tube with a ~35mm diameter.
Starting at $0.39
Socket - 9 Pin, Ceramic, PC Mount, Gold Pins
9-pin ceramic tube socket with gold pins commonly used for preamp tubes or EL84 power tubes
  • PC mount
  • 7/8” tail diameter
  • Gold pins
$3.69
Socket - 5 Pin, Ceramic Plate, bottom mount
5-pin ceramic plate socket used for 807 tubes.
  • Bottom mount
  • 1" to 1 ¼" chassis hole required
  • 1 ¾" mounting centers
  • UY-Base, 5 Pins
$5.63
Vacuum Tube Retainer - for 12AX7 Tubes
Mounting Centers = 1", Overall Height = 2.2". Keeps common preamp tubes in place while dampening vibrations to reduce microphonics. Supports a maximum tube height of 2.1 inches
$2.42
Tube Base - 4 pin replacement, 1.36" diameter
Replacement 4-pin tube base for use with tubes such as the 811A or 300B.
$4.90
Socket Saver - 9 Pin Miniature, for reducing wear and tear
9 pin miniature socket saver. Commonly used in tube testers. Socket savers absorb the main wear and tear from many tube insertions and removals. It's much easier to replace a worn out socket saver than to replace the original socket.
$4.06
Socket - 8 Pin Octal, Ceramic, with Separate Retaining Ring
8-pin ceramic tube socket commonly used for octal based power, preamp, and rectifier tubes. Great replacement for Fender, Marshall and others.
  • Convenient top or bottom mount capabilities
  • Includes mounting bracket
  • Spade type pins
  • 1-1/16” to 1-1/8” chassis hole required
  • 1-7/16” oblong mounting centers
$1.95
Tube Shield - For 9-Pin, Aluminum, Extra Long
Extra long (70mm) aluminum tube shield for noval tubes. Ideal for tubes that are longer than a standard preamp tube such as the 6CG7, 12BH7, etc.
  • Includes shield base
  • Designed for longer than standard pre-amp tubes
  • Sold individually
  • Compatible with P-ST9-212
$1.55
Socket - 9 Pin, Standoff Ceramic PC Mount
9-pin ceramic tube socket with stand-off mounting. commonly used for preamp tubes or EL84 power tubes.
  • Standoff, PC mount
  • 0.822” outer diameter
  • 3/4” tail diameter
$2.19
Socket - 7 Pin, Ceramic for 1625, bottom mount
7-pin ceramic plate socket used for 1625 tubes. Bossed mounting holes and recessed rivets allow sub-panel mounting .
  • Bottom mount
  • 1”- 1 ¼" chassis hole required
  • 1-13/16” oblong mounting centers
$4.94
Solid State Rectifier - For 5AR4, 5U4, 5Y3 Tubes
Solid State Rectifier Direct plug-in replacement for 5AR4, 5U4 and 5Y3 rectifier vacuum tubes in amplifiers with center tapped secondary power transformer. Use when less 'sag' is desired in the power supply; just switch back to the tube rectifier when 'sag' is desired.
$9.95
Tube Base - 8 Pin octal, 1.25" diameter
Colors Available:
Used for vacuum tube octal plug or coil form. 1-¼" dia. x 7/8" high.
$3.41
Socket - 9 Pin, Ceramic, for Auto-Wave Soldering
9-pin ceramic tube socket for auto-wave soldering applications.
Measurements:
  • Center PCB hole diameter -0.73"
  • Mounting pin diameters - (9 holes at 1.00") and (3 holes at 1.26")
$2.95
Socket - 8 pin octal, Sleeve Connectors, 1" with Bracket
Ceramic Tube socket used for octal power tubes.
  • Chassis hole: 1” to 1-1/4” depending on mounting (Top: 1” to 1-1/16”, Bottom: 1-1/4”)
  • Mounting Centers: 1-1/2” with oblong mounting holes
$2.44
Socket - 8 pin octal, Fork Connectors, 1" with Bracket
Ceramic Tube socket used for octal power tubes.
  • Chassis hole: 1” to 1-5/32” depending on mounting (Top: 1” Bottom: 1-5/32”)
  • Mounting Centers: 1-1/2” with oblong mounting holes
$2.44
Socket - 9 Pin, Ceramic, PC Mount, with center shield
9-pin ceramic tube socket with center shield lug and PC pins commonly used for preamp tubes or EL84 power tubes
  • PC mount
  • 7/8” chassis hole required
  • ⅞" tail diameter
$2.19
Socket - 7 Pin, Miniature, Ceramic with Mounting Ring
Ceramic 7-pin socket with center shield and mounting bracket.
  • Convenient top or bottom mounting capabilities
  • 5/8” chassis hole required
  • 7/8” mounting centers
$2.19
Socket - 8 Pin Octal, Relay, terminal strips
Great for experimenting! Use anywhere you would use a normal octal tube socket, but use screw terminal strips to attach wiring. No need to mount socket and solder leads.
$13.65
Tube Base - 8 Pin, Gold Coated Pins, 1.20" diameter
8 pin tube base with gold pins.
Outer Diameter: 1.20"
Inner Diameter: 1.16"
Height (not including pins or keyway): 0.79"
$4.03
Keyway - Replacement piece for octal tubes
Package of 4
Do you have valuable octal type tubes that work fine except the keyway has been broken off the base? Fix it with this simple and inexpensive product. Simply clean the remainder of the broken keyway from the base and slip one of these on. Will stay on by itself, or you can use a dab of silicon to attach if you wish.
$10.00
Socket - 8 Pin, 1.14" mounting hole
8-pin plastic tube socket commonly used for octal based power, preamp, and rectifier tubes.
  • 1-1/8” / 1.14” chassis hole required
  • Snap-in Mounting

*Uses P-SH12-1-31 or P-SH2-104-2
$2.44
Socket - 7 Pin, Miniature, Ceramic, with Aluminum Shield
7-pin tube socket commonly used for preamp tubes. Shield Included.
  • Top mount
  • 1-7/8” shield height
  • 5/8” chassis hole required
  • 7/8” mounting centers
  • Includes Shield
$1.13
Tube Converter - Yellow Jacket®, YJ20
The YJ20 is for use in most amplifiers using 6V6 output tubes. The YJ20 is similar to the YJC but does not drop the plate and screen voltages. It is meant for use in lower power output amps (20 watts or less) when no power reduction is desired. The ground wire connects to the chassis-ground for cathode-biased amplifiers. All Yellow Jacket® converters come with JJ Brand EL84/6BQ5 vacuum tubes.
  • All Yellow Jacket® converters come with JJ Brand EL84/6BQ5 vacuum tubes.
  • Converts most audio amplifiers with 6V6s and similar-based tubes to EL84s without modification or rebiasing.
  • Converts: Class AB to Class A operation
  • Drops Output Power: Does not drop power.
  • Safe for all common amplifiers and transformers.

Yellow Jacket® converters are a type of specialized adapter which permit the use of EL84/6BQ5 power tubes in place of 6V6, 6L6, EL34, and 7591 type vacuum tubes.
Starting at $44.95