Vacuum Tube Accessories

Socket - 9 Pin, PC Mount, Black Plastic
9-pin plastic tube socket commonly used for preamp tubes or EL84 power tubes
  • PC mount
  • ¾” chassis hole required (bottom mount)
  • 3/4” tail diameter
$1.39
Socket - 7 Pin, Large, Ceramic for 813, Chinese
7-pin ceramic plate socket used for 813 tubes. Bossed mounting holes and recessed rivets allow sub-panel mounting. Made in China
  • Bottom mount
  • 1 ¼" chassis hole required
  • 1-⅞" x 1-⅞" oblong mounting centers
$4.94
Socket - 9 Pin, for Auto-Wave Soldering, Made in China
9-pin Micalex ceramic tube socket for auto-wave soldering applications.
Measurements:
  • Center PCB hole diameter -0.73"
  • Mounting pin diameters - (9 holes at 1.00") and (3 holes at 1.26")
$2.44
Socket - 8 Pin Octal, ⅞" Fits in 1" Hole with Bracket PC Mount
Ceramic Tube socket used for octal power tubes, PC mount
  • Chassis hole: 1” to 1-1/4” depending on mounting (Top: 1” to 1-1/8”, Bottom: 1-1/4”)
  • Mounting Centers: 1-1/2” with oblong mounting holes
  • PC mount pins
$2.44
Socket - 9 Pin, Plastic, ¾" mounting hole, top mount
9-pin plastic tube socket commonly used for preamp tubes or EL84 power tubes
  • Top mount
  • 3/4” chassis hole required
  • 1-1/8” mounting centers

Please note: This socket will not work with tube retainer S-H144
$1.65
Socket Saver - 8-Pin, for reducing wear and tear on tube sockets
8 pin octal socket saver. Commonly used in tube testers. Socket savers absorb the main wear and tear from many tube insertions and removals. It's much easier to replace a worn out socket saver than to replace the original socket.
$9.95
Terminal Board - two 8 Pin sockets, 2 x 12 lugs
Dual socket. 2 rows/12 lugs per row, 4 mounting holes. Board dimensions 5 ¼" x 3". Terminals are not pre-wired.
$33.95
Socket - Belton, 8 Pin, for Auto Wave Soldering
Belton 8-pin tube socket specifically designed for auto-wave soldering .Applicable for all types of electronic equipment using vacuum tubes.
  • 1-3/16” chassis hole required
  • Mounting centers are 1 ½", 1 13/16"

Features:
  • Safety attachment with 3 positions of mounting pins
  • Easy mount with the precise designed tube pins
  • Glassfiber filled PPS insulating material
$3.50
Socket - 9 Pin, Ceramic with Center Shield, Top Mount
9-pin ceramic tube socket with center shield commonly used for preamp tubes or EL84 power tubes
  • Top mount
  • 3/4” chassis hole required
  • 1-1/8” mounting centers
$1.56
Socket Saver - 8-Pin with bracket, for reducing wear and tear
8 pin socket saver with bracket. Commonly used in tube testers. Socket savers absorb the main wear and tear from many tube insertions and removals. It's much easier to replace a worn out socket saver than to replace the original socket.
$11.95
Terminal Board - two 9 Pin sockets, 2 x 12 lugs
Dual socket. 2 rows/12 lugs per row, 4 mounting holes. Board dimensions 5 ¼" x 3". Terminals are not pre-wired.
$27.50
Socket - 9 Pin, Ceramic, PC Mount with Aluminum Shield
9-pin ceramic tube socket commonly used for preamp tubes or EL84 power tubes (without shield)
  • Top mount with PC pins
  • 1-15/16” shield height
  • 7/8” chassis hole required
  • 1” mounting centers
  • 13/16” tail diameter
  • Includes shield
$2.81
Socket - 9 pin miniature, ceramic, bottom or top mount
Ceramic tube socket commonly used for preamp tubes or EL84 power tubes.
  • Chassis hole: 7/8”
  • Mounting Centers: 1-1/8”
  • Bottom or top mount
$1.38
Socket - Belton, 8 Pin Octal, Micalex, MIP, PC Mount
Belton 8-pin Micalex tube socket commonly used for octal based power, preamp, and rectifier tubes. Applicable for use with all types of electronic equipment using vacuum tubes.
  • Convenient top or bottom, PC mount capabilities
  • 1-1/4” chassis hole required
  • 1-1/2” mounting centers

Features:
  • Paddle saddle mounting
  • Phosphorous bronze pin terminal with tin plating
  • Glassfiber filled PPS Insulating material
  • Easy mount with saddle of extruded screw hole
  • Short leads
$3.50
Terminal Board - two 9 Pin sockets, for Dynaco Mark III
For Dynaco Mark III. Dual socket, 2 rows/11 lugs per row, 4 mounting holes. Board dimension 4.25" x 3.45". 0.125" thickness.
$25.75
Socket - 9 Pin, Ceramic with Center Shield and Shield Base
9-pin ceramic tube socket with attached shield base commonly used for preamp tubes or EL84 power tubes (without shield)
  • Top mount
  • 7/8” chassis hole required
  • 1-1/8” mounting centers
  • P-SS9-325 and P-SS9-325XL are compatible tube shields.
$1.56
Socket - Belton, 9 Pin, Miniature, Bottom Mount
Belton Micalex tube socket used for 9 pin miniature tubes, bottom mount. Applicable for use with all types of electric and electronic equipment using vacuum tubes.
  • Chassis hole: ¾”
  • Mounting Centers: 1-1/8”
  • Bottom mount

Features:
  • Paddle saddle mounting
  • Phosphorous bronze pin terminal with tin plating
  • Glassfiber fileld PPS Insulating material
  • Easy mount with collar attached socket
$2.95
Socket - 8 Pin, 1" Chassis Hole, 1-¼" Mounting Centers
8-pin plastic tube socket commonly used for octal based power, preamp, and rectifier tubes.
  • Bottom mount
  • Includes mounting bracket
  • 1” chassis hole required
  • 1 ¼" mounting centers
$4.06
Socket - 4 Pin, Ceramic Plate, bottom-mount
Bottom mount ceramic socket has bossed mounting holes and recessed rivets to allow sub-panel mounting. Socket fits 300B, 811 size tubes.
$4.94
Socket - 7 Pin, Miniature, Standoff Ceramic PC Mount
7-pin ceramic tube socket with PC pins commonly used for tubes such as the 6X4 rectifier.
  • PC mount
  • 11/16” chassis hole required
  • 11/16" tail diameter
$2.19
Socket - 9 Pin, Miniature, PC mount, with Shielded Base
Top mount, mounting centers = 1", chassis hole = ¾".
$2.19
Socket - 9 Pin, ¾" mounting hole, PC Mount
9-pin Micalex tube socket commonly used for preamp tubes or EL84 power tubes. Applicable for use with all types of electronic equipment using vacuum tubes. Features:
  • Top mount
  • 3/4” tail diameter
  • 1-1/8” mounting center
$3.44
Socket - 8 Pin Octal, Saddle Plate, Black, Top Mount
8-pin plastic tube socket commonly used for octal based power, preamp, and rectifier tubes.
  • Top mount
  • 1-1/16” chassis hole required
  • 1 ½" mounting centers
$3.69
Socket - 4 Pin, Ceramic, Chassis Mount
4-pin ceramic tube socket.
  • Bottom mount
  • 1-1/4” chassis hole required
  • 1-1/2” mounting centers
$3.13