Vacuum Tube Accessories

Terminal Board - two 9 Pin sockets, 2 x 12 lugs
Dual socket. 2 rows/12 lugs per row, 4 mounting holes. Board dimensions 5 ¼" x 3". Terminals are not pre-wired.
$27.50
Socket - 8 Pin, 1.14" mounting hole
8-pin plastic tube socket commonly used for octal based power, preamp, and rectifier tubes.
  • 1-1/8” / 1.14” chassis hole required
  • Snap-in Mounting

*Uses P-SH12-1-31 or P-SH2-104-2
$2.80
Socket - 8 Pin Octal, Ceramic PC Mount
8-pin ceramic stand-off tube socket commonly used for octal based power, preamp, and rectifier tubes.
  • PC mount
  • 1” tail diameter
  • Available with standard or gold pins
Starting at $2.49
Socket - 9 Pin, Ceramic with Center Shield, Top Mount
9-pin ceramic tube socket with center shield commonly used for preamp tubes or EL84 power tubes
  • Top mount
  • 3/4” chassis hole required
  • 1-1/8” mounting centers
$1.70
Socket - 8 pin octal, Fork Connectors, 1" with Bracket
Ceramic Tube socket used for octal power tubes.
  • Chassis hole: 1” to 1-5/32” depending on mounting (Top: 1” Bottom: 1-5/32”)
  • Mounting Centers: 1-1/2” with oblong mounting holes
$2.80
Socket - 9 Pin Miniature, Ceramic Base, Aluminum Shield
9-pin tube socket commonly used for preamp tubes or EL84 power tubes (without shield)
  • Top mount
  • 1-15/16” shield height
  • 7/8” chassis hole required
  • 1-1/8” mounting centers
  • Includes shield
$3.30
Socket - Belton, Micalex, 8 pin octal, MIP
High insulated 8-pin tube socket commonly used for octal power tubes. Fits 1 3/16" to 1 1/4" chassis hole diameter. Applicable for use in all types of electric and electronic equipment using vacuum tubes. Features:
  • Panel saddle mounting
  • Easy mount with the saddle of extruded screw hole
  • Phosphorus bronze terminal pin with solder plating
  • Glassfiber filled PPS insulating material.
$3.50
Socket - 9 pin miniature, ceramic, bottom or top mount
Ceramic tube socket commonly used for preamp tubes or EL84 power tubes.
  • Chassis hole: 7/8”
  • Mounting Centers: 1-1/8”
  • Bottom or top mount
$1.50
Socket - 7 Pin, Miniature, Ceramic, with Aluminum Shield
7-pin tube socket commonly used for preamp tubes. Shield Included.
  • Top mount
  • 1-7/8” shield height
  • 5/8” chassis hole required
  • 7/8” mounting centers
  • Includes Shield
$1.30
Socket - 9 Pin, Ceramic Base with Aluminum Shield
9-pin tube socket commonly used for preamp tubes or EL84 power tubes (without shield)
  • Top mount
  • 1-15/16” shield height
  • 3/4” chassis hole required
  • 1-1/8” mounting centers
  • Includes shield
$3.30
Socket - Belton, Micalex, 8 Pin, Octal PC Mount, Long Lead
Belton 8-pin Micalex PC mount tube socket with long leads commonly used for octal based power, preamp, and rectifier tubes. Applicable for use with all types of electronic equipment using vacuum tubes.
  • Convenient top or bottom mount capabilities
  • 1-1/4” chassis hole required
  • 1-1/2” oblong mounting centers

Features:
  • Paddle saddle mounting
  • Easy mount with the saddle of extruded screw hole
  • Phosphorous bronze pin terminal with tin plating
  • Glassfiber filled PPS Insulating material
  • Long leads
$3.85
Socket - Belton, 9 Pin, Miniature, Bottom Mount
Belton Micalex tube socket used for 9 pin miniature tubes, bottom mount. Applicable for use with all types of electric and electronic equipment using vacuum tubes.
  • Chassis hole: ¾”
  • Mounting Centers: 1-1/8”
  • Bottom mount

Features:
  • Paddle saddle mounting
  • Phosphorous bronze pin terminal with tin plating
  • Glassfiber fileld PPS Insulating material
  • Easy mount with collar attached socket
$2.95
Mounting Plate - for wavy washer sockets
When hole in chassis is too large to mount Type S sockets directly to chassis with wavy washer, this adapter can be used. 1 3/16" dia. opening in plate, 1 ½" to about 1 7/8" mounting centers can be used. Socket is secured to plate with wavy washer.
$1.90
Socket - Belton, Micalex, 8-Pin Octal, MIP, Flanged Holes
Belton 8-pin Micalex tube socket commonly used for octal based power, preamp, and rectifier tubes. Applicable for use with all types of electronic equipment using vacuum tubes. This version has circular extruded holes.
$3.50
Socket - 9 Pin, Miniature, with Shielded Base
9-pin phenolic tube socket with attached shield base.
  • Top mount
  • 3/4” chassis hole required
  • 1-1/8” mounting centers

Please Note: Tube retainer S-H144 will not work with this socket
$2.45
Socket - 8 Pin Octal, Saddle Plate, Black, Bottom Mount
Plastic octal tube socket commonly used for power tubes in many amps.
  • Chassis hole: 1 ⅛"
  • Mounting Centers: 1 ½"
  • Bottom mount
$4.20
Socket - 9 Pin, ¾" mounting hole, PC Mount
9-pin Micalex tube socket commonly used for preamp tubes or EL84 power tubes. Applicable for use with all types of electronic equipment using vacuum tubes. Features:
  • Top mount
  • 3/4” tail diameter
  • 1-1/8” mounting center
$3.44
Socket - 4 Pin, Ceramic Plate, bottom-mount
Bottom mount ceramic socket has bossed mounting holes and recessed rivets to allow sub-panel mounting. Socket fits 300B, 811 size tubes.
$4.99
Socket - 9 Pin, Miniature, Plastic, PC Mount
9-pin plastic tube socket commonly used for preamp tubes or EL84 power tubes.
  • Standoff, PC mount
  • 3/4” tail diameter
$1.89
Socket - 8 Pin, Phenolic, MIP, top mount
8-pin phenolic tube socket commonly used for octal based power, preamp, and rectifier tubes.
  • Top mount
  • 1 3/16" to 1 ¼".chassis hole required
  • 1-1/2” mounting centers

*Please Note: The S-H142 tube clip is not compatible with this socket.
$5.50
Socket - Belton, 9 pin, crimped with shield base, Micalex
Belton micalex tube socket commonly used for preamp tubes or EL84 power tubes
  • Fits ¾" chassis hole diameter
  • See P-SS9-400 for a compatible tube shield
$2.95
Socket - 4 Pin, Ceramic, Chassis Mount
4-pin ceramic tube socket.
  • Bottom mount
  • 1-1/4” chassis hole required
  • 1-1/2” mounting centers
$3.55
Socket - 9 Pin, Ceramic, PC Mount, Gold Pins
9-pin ceramic tube socket with gold pins commonly used for preamp tubes or EL84 power tubes
  • PC mount
  • 7/8” tail diameter
  • Gold pins
$3.89
Socket - 8 Pin Octal, Ceramic, top or bottom mount
8-pin ceramic tube socket commonly used for octal based power, preamp, and rectifier tubes. Can be top mounted or bottom mounted, using unique ring mount. Great replacement for Fender, Marshall and others.
  • Convenient top or bottom mount capabilities
  • Includes mounting bracket
  • 1-1/16” to 1-1/8” chassis hole required
  • 1-7/16” oblong mounting centers
$2.65