Vacuum Tube Accessories

Tube Converter - Yellow Jackets®, YJS, Converter Only
Converter-only version of the P-YJS. Tubes not included. Requires an EL84 vacuum tube, such as:
  • T-EL84-EH (Electro-Harmonix)
  • T-EL84-GEN (Genalex)
  • T-EL84-JJ (JJ Electronic)
  • T-EL84-MUL (Mullard)
  • T-EL84-MP-PV (Peavey)
  • T-EL84-S-MP-GT (Groove Tubes)
  • T-EL84-SOVT (Sovtek)
  • T-EL84-TAD (Tube Amp Doctor)
  • T-EL84-TUNG (Tung-Sol)
  • T-EL84_6BQ5 (NOS)
  • T-EL844-JJ (JJ Electronic EL844)
  • T-EL84M-SOVT (Sovtek EL84M)

We also sell an EL84 sampler set containing 9 EL84 tubes:
  • T-EL84-SET

The YJS is a specialized, current-limiting/voltage-conditioning adapter for use in most 20 to 100 watt amps that use 6L6, EL34, 6550 or 6V6 output tubes. The YJS is for amps with fixed bias power tubes.
$37.50
Tube Converter - Yellow Jackets®, YJC, Converter Only
Converter-only version of the P-YJC. Tubes not included. Requires an EL84 vacuum tube, such as:
  • T-EL84-EH (Electro-Harmonix)
  • T-EL84-GEN (Genalex)
  • T-EL84-JJ (JJ Electronic)
  • T-EL84-MUL (Mullard)
  • T-EL84-MP-PV (Peavey)
  • T-EL84-S-MP-GT (Groove Tubes)
  • T-EL84-SOVT (Sovtek)
  • T-EL84-TAD (Tube Amp Doctor)
  • T-EL84-TUNG (Tung-Sol)
  • T-EL84_6BQ5 (NOS)
  • T-EL844-JJ (JJ Electronic EL844)
  • T-EL84M-SOVT (Sovtek EL84M)

We also sell an EL84 sampler set containing 9 EL84 tubes:
  • T-EL84-SET

The YJC is similar to the YJS, but for use in amps with cathode-biased power tubes. Cathode-biased power tubes have a bias resistor connected from their cathode to ground.
$37.50
Tube Converter - Yellow Jackets®, YJShort, Converter Only
Converter-only version of the P-YJShort. Tubes not included. Requires an EL84 vacuum tube, such as:
  • T-EL84-EH (Electro-Harmonix)
  • T-EL84-GEN (Genalex)
  • T-EL84-JJ (JJ Electronic)
  • T-EL84-MUL (Mullard)
  • T-EL84-MP-PV (Peavey)
  • T-EL84-S-MP-GT (Groove Tubes)
  • T-EL84-SOVT (Sovtek)
  • T-EL84-TAD (Tube Amp Doctor)
  • T-EL84-TUNG (Tung-Sol)
  • T-EL84_6BQ5 (NOS)
  • T-EL844-JJ (JJ Electronic EL844)
  • T-EL84M-SOVT (Sovtek EL84M)

We also sell an EL84 sampler set containing 9 EL84 tubes:
  • T-EL84-SET

The YJShort is shorter than the standard YJS converter, allowing for use in amps that do not have room for the standard converters.
$45.00
Tube Converter - Yellow Jackets®, YJS, Triode Version, converter only
Converter-only version of the P-YJS-T. Tubes not included. Requires an EL84 vacuum tube, such as:
  • T-EL84-EH (Electro-Harmonix)
  • T-EL84-GEN (Genalex)
  • T-EL84-JJ (JJ Electronic)
  • T-EL84-MUL (Mullard)
  • T-EL84-MP-PV (Peavey)
  • T-EL84-S-MP-GT (Groove Tubes)
  • T-EL84-SOVT (Sovtek)
  • T-EL84-TAD (Tube Amp Doctor)
  • T-EL84-TUNG (Tung-Sol)
  • T-EL84_6BQ5 (NOS)
  • T-EL844-JJ (JJ Electronic EL844)
  • T-EL84M-SOVT (Sovtek EL84M)

We also sell an EL84 sampler set containing 9 EL84 tubes:
  • T-EL84-SET

The YJS is a specialized, current-limiting/voltage-conditioning adapter for use in most 20 to 100 watt amps that use 6L6, EL34, 6550 or 6V6 output tubes. The YJS is for amps with fixed bias power tubes.
$37.50
Bracket - for 8 Pin vacuum tube sockets
Washer fits around the socket in in order to hold it to the chassis. for 8 pin sockets.
$0.62
Bracket - for 9 Pin vacuum tube socket
Washer fits around sockets to hold them to chassis.
$0.50
Grid / Plate Anode Cap - Ceramic for tubes
Diameter listed is the inside diameter. The anode cap is used for making an electrical connection to vacuum tubes which have anode high voltage connection from the top. Its contact resistance is less than 0.01 ohm, insulation resisitance is over 10,000 Mohm. Life time is about 200 cycles.
Starting at $1.15
Mounting Plate - for wavy washer sockets
When hole in chassis is too large to mount Type S sockets directly to chassis with wavy washer, this adapter can be used. 1 3/16" dia. opening in plate, 1 ½" to about 1 7/8" mounting centers can be used. Socket is secured to plate with wavy washer.
$1.86
Tube Base - 4 pin replacement, 1.36" diameter
Replacement 4-pin tube base for use with tubes such as the 811A or 300B.
$4.90
Tube Base - 4 pin, ceramic, 1.25" diameter
4 pin, ceramic tubes base, 1 ¼" diameter - 1 1/16" tall.
$2.83
Save 51%
Originally: $5.75
Tube Base - 8 Pin, Gold Coated Pins, 1.57" diameter
8 pin tube base with gold coated pins.
Outer Diameter: 1.57"
Inner Diameter: 1.52"
Height (not including pins or keyway): 0.80"
$4.03
On Backorder
Tube Base - 8 Pin, Gold Coated Pins, 1.20" diameter
8 pin tube base with gold pins.
Outer Diameter: 1.20"
Inner Diameter: 1.16"
Height (not including pins or keyway): 0.79"
$4.03
Tube Base - 8 Pin octal, 1.25" diameter
Colors Available:
Used for vacuum tube octal plug or coil form. 1-¼" dia. x 7/8" high.
$3.41
Plug - 8-Pin octal tube base, Black Plastic
Black plastic 8-pin plug. This is the bottom portion of an octal tube base including all 8 pins and guide key between pins 1 and 8.
$1.88
Tube Shield - 9 Pin Mini, Bayonet, J Slot, 1-½" Tall, Aluminum
NOS (Eby) aluminum tube shield (no base), spring loaded, for short 9 pin miniature tubes like NOS 6386 with 1.50" seated height. (Too short to fit more common 9 pin miniature tubes like 12AX7 with 1.94" seated height).
$0.35
Tube Shield - 9 Pin Miniature, 1-½" Tall with Bayonet Base
Made in China. Aluminum tube shield (with base), spring loaded, for short 9 pin miniature tubes like NOS 6386 with 1.50" seated height. (Too short to fit more common 9 pin miniature tubes like 12AX7 with 1.94" seated height).
$1.55
Tube shield - for 9-pin miniature, aluminum, multiple colors
Colors Available:
Protect your preamp tubes and customize them to suit your style with these colorful aluminum tube shields.
Starting at $1.18
Tube Shield - For 9-Pin, Aluminum, Extra Long
Extra long (70mm) aluminum tube shield for noval tubes. Ideal for tubes that are longer than a standard preamp tube such as the 6CG7, 12BH7, etc.
  • Includes shield base
  • Designed for longer than standard pre-amp tubes
  • Sold individually
  • Compatible with P-ST9-212
$1.55
Tube Shield - High Quality, Fits P-ST9-700 with Spring
New production, aluminum, 2" tall, for use with P-ST9-700 and P-ST9-700-PC.
$1.95
Tube Shield - Belton, Push Twist for Socket P-ST9-AWS
2" tall, for use with P-ST9-AWS. Push/twist to chassis, no mounting centers. Belton manufacture. Aluminum sleeve with natural coil spring. Spring length: 26mm
$2.75
On Backorder
Tube Shield - 2", Chinese manufacture
2" tall, for use with P-ST9-AWS or P-ST9-AWS-CHINA
$2.60
Socket - 4 Pin, Ceramic Plate, bottom-mount
Bottom mount ceramic socket has bossed mounting holes and recessed rivets to allow sub-panel mounting. Socket fits 300B, 811 size tubes.
$4.94
Socket - 4 Pin, Jumbo, Ceramic Bayonet
Colors Available:
4-pin jumbo ceramic bayonet socket used for 211 and 845 tubes.
  • Top mount
  • 2-13/16" mounting centers
  • Available with standard or gold plated pins
Starting at $9.94
Socket - 4 Pin, Ceramic, Chassis Mount
4-pin ceramic tube socket.
  • Bottom mount
  • 1-1/4” chassis hole required
  • 1-1/2” mounting centers
$3.13