Vacuum Tube Accessories

Mounting Plate - for wavy washer sockets
When hole in chassis is too large to mount Type S sockets directly to chassis with wavy washer, this adapter can be used. 1 3/16" dia. opening in plate, 1 ½" to about 1 7/8" mounting centers can be used. Socket is secured to plate with wavy washer.
$1.90
Washer - Wavy, for P-ST8-810 mounting
Works with P-ST8-810 for mounting without screws.
$0.60
Socket - 4 Pin, Ceramic Plate, bottom-mount
Bottom mount ceramic socket has bossed mounting holes and recessed rivets to allow sub-panel mounting. Socket fits 300B, 811 size tubes.
$4.99
Socket - 4 Pin, Jumbo, Ceramic Bayonet
Colors Available:
4-pin jumbo ceramic bayonet socket used for 211 and 845 tubes.
  • Top mount
  • 2-13/16" mounting centers
  • Available with standard or gold plated pins
Starting at $9.99
Socket - 4 Pin, Ceramic, Chassis Mount
4-pin ceramic tube socket.
  • Bottom mount
  • 1-1/4” chassis hole required
  • 1-1/2” mounting centers
$3.55
Socket - 5 Pin, Ceramic Plate, bottom mount
5-pin ceramic plate socket used for 807 tubes.
  • Bottom mount
  • 1" to 1 ¼" chassis hole required
  • 1 ¾" mounting centers
  • UY-Base, 5 Pins
$5.99
Socket - 7 Pin, Miniature, Standoff Ceramic PC Mount
7-pin ceramic tube socket with PC pins commonly used for tubes such as the 6X4 rectifier.
  • PC mount
  • 11/16” chassis hole required
  • 11/16" tail diameter
$2.50
Socket - 7 Pin, Large, Ceramic Plate for 6C33C
7-pin ceramic plate socket used for 6C33B,829B and 3E29 sized tubes. Bossed mounting holes and recessed rivets allow sub-panel mounting .
  • Bottom mount
  • 1 ¼" chassis hole required
  • 1-⅞" x 1-⅞" oblong mounting centers
$5.55
Socket - 7 Pin, Ceramic for 1625, bottom mount
7-pin ceramic plate socket used for 1625 tubes. Bossed mounting holes and recessed rivets allow sub-panel mounting .
  • Bottom mount
  • 1”- 1 ¼" chassis hole required
  • 1-13/16” oblong mounting centers
$4.99
Socket - 7 Pin, Large, Ceramic for 813, Chinese
7-pin ceramic plate socket used for 813 tubes. Bossed mounting holes and recessed rivets allow sub-panel mounting. Made in China
  • Bottom mount
  • 1 ¼" chassis hole required
  • 1-⅞" x 1-⅞" oblong mounting centers
$5.30
Socket - 7 Pin, Miniature, Ceramic with Mounting Ring
Ceramic 7-pin socket with center shield and mounting bracket.
  • Convenient top or bottom mounting capabilities
  • 5/8” chassis hole required
  • 7/8” mounting centers
$2.50
Socket - 7 Pin, Miniature, Ceramic, with Shield Base
7-pin tube socket with shield base commonly used for preamp tubes
  • Top mount
  • 5/8” chassis hole required
  • 7/8” mounting centers
  • Shield Base
$1.20
Socket - 7 Pin, Miniature, Ceramic, with Aluminum Shield
7-pin tube socket commonly used for preamp tubes. Shield Included.
  • Top mount
  • 1-7/8” shield height
  • 5/8” chassis hole required
  • 7/8” mounting centers
  • Includes Shield
$1.30
Socket Saver - 8-Pin, for reducing wear and tear on tube sockets
8 pin octal socket saver. Commonly used in tube testers. Socket savers absorb the main wear and tear from many tube insertions and removals. It's much easier to replace a worn out socket saver than to replace the original socket.
$9.95
Socket - 8 Pin Octal, Ceramic PC Mount
8-pin ceramic stand-off tube socket commonly used for octal based power, preamp, and rectifier tubes.
  • PC mount
  • 1” tail diameter
  • Available with standard or gold pins
Starting at $2.49
Socket Saver - 8-Pin with bracket, for reducing wear and tear
8 pin socket saver with bracket. Commonly used in tube testers. Socket savers absorb the main wear and tear from many tube insertions and removals. It's much easier to replace a worn out socket saver than to replace the original socket.
$11.95
Socket - Belton, Micalex, 8 pin octal, MIP
High insulated 8-pin tube socket commonly used for octal power tubes. Fits 1 3/16" to 1 1/4" chassis hole diameter. Applicable for use in all types of electric and electronic equipment using vacuum tubes. Features:
  • Panel saddle mounting
  • Easy mount with the saddle of extruded screw hole
  • Phosphorus bronze terminal pin with solder plating
  • Glassfiber filled PPS insulating material.
$3.50
Socket - Belton, Micalex, 8-Pin Octal, MIP, Flanged Holes
Belton 8-pin Micalex tube socket commonly used for octal based power, preamp, and rectifier tubes. Applicable for use with all types of electronic equipment using vacuum tubes. This version has circular extruded holes.
$3.50
Socket - Belton, 8 Pin Octal, Micalex, MIP, PC Mount
Belton 8-pin Micalex tube socket commonly used for octal based power, preamp, and rectifier tubes. Applicable for use with all types of electronic equipment using vacuum tubes.
  • Convenient top or bottom, PC mount capabilities
  • 1-1/4” chassis hole required
  • 1-1/2” mounting centers

Features:
  • Paddle saddle mounting
  • Phosphorous bronze pin terminal with tin plating
  • Glassfiber filled PPS Insulating material
  • Easy mount with saddle of extruded screw hole
  • Short leads
$3.50
Socket - Belton, Micalex, 8 Pin, Octal PC Mount, Long Lead
Belton 8-pin Micalex PC mount tube socket with long leads commonly used for octal based power, preamp, and rectifier tubes. Applicable for use with all types of electronic equipment using vacuum tubes.
  • Convenient top or bottom mount capabilities
  • 1-1/4” chassis hole required
  • 1-1/2” oblong mounting centers

Features:
  • Paddle saddle mounting
  • Easy mount with the saddle of extruded screw hole
  • Phosphorous bronze pin terminal with tin plating
  • Glassfiber filled PPS Insulating material
  • Long leads
$3.85
Socket - 8 Pin, 1" Chassis Hole, 1-¼" Mounting Centers
8-pin plastic tube socket commonly used for octal based power, preamp, and rectifier tubes.
  • Bottom mount
  • Includes mounting bracket
  • 1” chassis hole required
  • 1 ¼" mounting centers
$4.35
Socket - 8 Pin Octal, Saddle Plate, Black, Bottom Mount
Plastic octal tube socket commonly used for power tubes in many amps.
  • Chassis hole: 1 ⅛"
  • Mounting Centers: 1 ½"
  • Bottom mount
$4.20
Socket - 8 Pin Octal, Saddle Plate, Black, Top Mount
8-pin plastic tube socket commonly used for octal based power, preamp, and rectifier tubes.
  • Top mount
  • 1-1/16” chassis hole required
  • 1 ½" mounting centers
$3.95
Socket - 8 Pin, Phenolic, MIP, top mount
8-pin phenolic tube socket commonly used for octal based power, preamp, and rectifier tubes.
  • Top mount
  • 1 3/16" to 1 ¼".chassis hole required
  • 1-1/2” mounting centers

*Please Note: The S-H142 tube clip is not compatible with this socket.
$5.50