Adapter bushings to retrofit US 1/4 inch post Kluson tuners in a headstock drilled for modern die cast tuners. Nickel plating. Set of 6. These Kluson® steel replacement - adapter bushings are intended for use in converting a modern 10mm drilled headstock to accept a vintage Kluson stamped steel tuning machines with the original US 1/4 inch string post diameter. Many repair shops use these to convert a vintage instrument back to original peg head specs
The Grover® 138 Series deluxe machine heads are mounted three to a plate for the vintage look that has been popular for decades. The stamped back plate provides a sturdy base for mounting vertically or horizontally on the head stock. The housings are securely fastened to the base insuring proper gear and worm alignment for accurate tuning. Bushings and screws included.
3 per side. New Kluson® 19:1 ratio die-cast tuning machine set for contemporary guitars. These state of the art diecast tuners are designed for usage on contemporary guitars and utilize the same mounting hole common to Grover 305 series medium tuners as well as the common Gotoh tuner with the mounting screw located offset at approximately 7 O'clock or 5 O'clock depending on left or right handed application. Uses the common modern 25/64 in. (10mm) peghole with a hex head type screw-in bushing and single mounting screw. All mounting hardware is included.
3 per side. The Kluson Contemporary Series 19:1 ratio locking tuning machine uses the more desirable rear knob locking system and is designed for usage on contemporary guitars. This design requires an individual mounting hole location offset at approximately 7 O'clock or 4 O'clock depending on left or right handed application (bass or treble side). Uses the common modern 25/64 in. (10mm) peghole with a hex head type screw-in bushing and single mounting screw. This is a 3 + 3 set of tuning machines with all mounting hardware included.
The Kluson Contemporary Series 19:1 ratio locking tuning machine uses the more desireable rear knob locking system and is designed for usage on contemporary guitars. This design requires an individual mounting hole location offset at approximately 7 O'clock or 4 O'clock depending on left or right handed application (bass or treble side). Uses the common modern 25/64 in. (10mm) peghole with a hex head type screw-in bushing and single mounting screw. This is a 6 in line set of tuning machines for right handed instruments (non-reverse headstocks) with all mounting hardware included
Single ring. Replacement color-correct Keystone (tulip) press-on button for Kluson® tuning machines. Correct for vintage applications. Sold individually. See P-GKLU-SLNDR for double ring.
Double ring. Replacement color-correct Keystone (tulip) press-on button for Kluson® tuning machines. Correct for vintage applications. Sold individually. See P-GKLU-SLN for single ring.
Replacement bushings for Fender® headstocks. Contemporary - 10.5mm outside diameter and 6.35mm inside diameter. These are the correct adapter bushings for contemporary Fender necks that are bored out to slightly larger modern specs. These work as reducer bushings to enable you to install a vintage Kluson tuner on a modern headstock from Fender without having to plug and redrill the pegholes.
Replacement bushings for Gibson® headstocks with 8.85mm outside diameter and 6.35mm inside diameter These Kluson® replacement push-in bushings are designed to appear like current Gibson® production with the more rounded flange. Same mounting specs as the bushings that accompany the current Kluson® production tuning machines so they will easily replace similar bushings with the same spec requirements
480.820.5411