Vacuum Tube - 12AT7 / ECC81, JJ Electronics
The JJ Electronic 12AT7 / ECC81 is a good choice for phase inverters, reverb drivers, and general preamp use. This tube offers low noise, low microphonics, and warm smooth tones at a great price. Like all JJ tubes, it has a rugged construction that doesn’t compromise the sound of your amp. The JJ 12AT7 is a solid replacement for any 12AT7, ECC81, or 6201 tube. It can also be used to replace 12AX7 tubes in position 1 to reduce gain.
RoHS Compliant
Accessory Items:
Pin Type | Our Part Number | UPC/EAN | JJ Electronics Part Number |
---|---|---|---|
Gold | T-12AT7-GOLD-JJ | 609722123471 | ECC81 / 12AT7 - GOLD |
Regular | T-12AT7-JJ | 844632064036 | ECC81 - 12AT7 |
Body Height | 49.2 mm | ||
Cathode Current (Ik) | ≤ 15 mA | ||
Filament Current (If) | 300 / 150 mA | ||
Filament Voltage (Uf) | 6.3 / 12.6 V | ||
Gain (μ) | 60 | ||
Grid Circuit Resistance (Rg) | 1 MΩ | ||
Grid Voltage (Ug) | ≥ -50 V, -2 V typical | ||
Heater to cathode voltage (Uk/f) | ≤ 90 V | ||
Internal Resistance (Ri) | 11 kΩ | ||
Item Diameter | 22 mm | ||
Item Height | 56.3 mm | ||
Plate Current (Ia) | 10 mA | ||
Plate Dissipation (Wa) | ≤ 2.5 W | ||
Plate Voltage (Ua) | ≤ 300 V, 250 V typical | ||
Transconductance (S) | 5.5 mA/V |
Packaging Dimensions | 1 in. × 1 in. × 2.5 in. | ||
Weight (Packaging) | Gold version | T-12AT7-GOLD-JJ | 0.0265 lbs. |
Regular version | T-12AT7-JJ | 0.03 lbs. |
T-12AT7-JJ - Regular version | Body Height | 49.2 mm |
Cathode Current (Ik) | ≤ 15 mA | |
Filament Current (If) | 300 / 150 mA | |
Filament Voltage (Uf) | 6.3 / 12.6 V | |
Gain (μ) | 60 | |
Grid Circuit Resistance (Rg) | 1 MΩ | |
Grid Voltage (Ug) | ≥ -50 V, -2 V typical | |
Heater to cathode voltage (Uk/f) | ≤ 90 V | |
Internal Resistance (Ri) | 11 kΩ | |
Item Diameter | 22 mm | |
Item Height | 56.3 mm | |
Plate Current (Ia) | 10 mA | |
Plate Dissipation (Wa) | ≤ 2.5 W | |
Plate Voltage (Ua) | ≤ 300 V, 250 V typical | |
Transconductance (S) | 5.5 mA/V | |
T-12AT7-GOLD-JJ - Gold version | Body Height | 49.2 mm |
Cathode Current (Ik) | ≤ 15 mA | |
Filament Current (If) | 300 / 150 mA | |
Filament Voltage (Uf) | 6.3 / 12.6 V | |
Gain (μ) | 60 | |
Grid Circuit Resistance (Rg) | 1 MΩ | |
Grid Voltage (Ug) | ≥ -50 V, -2 V typical | |
Heater to cathode voltage (Uk/f) | ≤ 90 V | |
Internal Resistance (Ri) | 11 kΩ | |
Item Diameter | 22 mm | |
Item Height | 56.3 mm | |
Plate Current (Ia) | 10 mA | |
Plate Dissipation (Wa) | ≤ 2.5 W | |
Plate Voltage (Ua) | ≤ 300 V, 250 V typical | |
Transconductance (S) | 5.5 mA/V |
Specification Sheet for Regular | T-12AT7-JJ |
Specification Sheet for Gold | T-12AT7-GOLD-JJ |
My Project Lists
Specifications, Files, and Documents
Questions? Contact us at [email protected], or give us a call at 480-820-5411
Substitute Products
The following items can be substituted for this product. While not necessarily exactly the same, they will function as replacement items in your project.
Product Reviews
One tube good. One bad! You selling junk now!
I used these for cathode followers in an SVT-style bass amp I designed. They do exactly what I need them to: supply a huge, immaculate signal to the power section. I prefer JJs to Chinese or Russian tubes; they seem better and more consistently built.
The people at AES are always helpful and informative!!!
I am resurrecting my 1966 Fender Princeton Reverb amp.
The reverb was a little weak and so I replaced the 12AT7 and BINGO the reverb was back
and strong as ever!!!
Thank you all!
Great tubes, sound great, last a long time
I'm rebuilding a 1973 Fender Quadreverb and decided to try some tube options. this JJ ECC81 is doing great. like everyone else I shop around to find a good deal and Antique Electronic Supply usually is where I wind up.
great tube
ordered set of tubes for resto of a 1956 Zenith am/fm...all NOS -EXCEPT the 12AT7 which was Slovokian 'manuf. This new tube was DEF...produced loud HUM when inserted in radio..suspect cathode leakage...PLUS the tube is HUGE..and barely fits between the 2 ifs..Ive asked for a replacement tube,,,and specified NOS if possible .
tubes worked ok on old ac voltmeter
I use this tube for more gain in my Leslie speaker cabinet. This goes in the place of 12au7 tube,and this is what I use it for.
I use this tube for more gain in my Leslie speaker cabinet. This goes in the place of 12au7 tube,and did is what I use it for.