Vacuum Tube - 12AU7 / ECC82, JJ Electronics

Vacuum Tube - 12AU7 / ECC82, JJ Electronics

JJ Electronics
Pictured: Regular
Pictured: Regular
Pictured: Regular
Pictured: Regular
Pictured: Gold
Pictured: Gold
Pictured: Gold
Pictured: Gold
Customer image:<br/>"12AU7 on the modulator board in my Heathkit HW-101."
Click to zoom in
Pictured: RegularPictured: RegularPictured: GoldPictured: Gold
Customer Images:
Customer image: "12AU7 on the modulator board in my Heathkit HW-101."
Starting at: $19.85
In Stock

The JJ Electronic 12AU7 / ECC82 is a medium gain dual triode built with the quality and reliability that we’ve come to expect from a JJ tube. This 12AU7 offers smooth tones and clear definition which is why it’s no surprise that this tube is often found in hifi equipment as well as guitar amplifiers.

SKU:
T-12AU7-JJ-X
Item ID:
004437
Brand:
JJ Electronics
RoHS Compliant
Part Numbers
Pin TypeOur Part NumberUPC/EANJJ Electronics Part Number
GoldT-12AU7-GOLD-JJ609722123488 ECC82 / 12AU7 - GOLD
RegularT-12AU7-JJ844632022074 ECC82 - 12AU7
Body Height49.2 mm
Cathode Current (Ik)≤ 20 mA
Filament Current (If)300 / 150 mA
Filament Voltage (Uf)6.3 / 12.6 V
Gain (μ)17
Grid Voltage (Ug)≥ -50 V, -8.5 V typical
Heater to cathode resistance (Rk/f)150 kΩ
Heater to cathode voltage (Uk/f)≤ 180 V
Internal Resistance (Ri)7.7 kΩ
Item Diameter22.2 mm
Item Height56.3 mm
Plate Current (Ia)10.5 mA
Plate Dissipation (Wa)≤ 2.75 W
Plate Voltage (Ua)≤ 300 V, 250 V typical
Transconductance (S)2.2 mA/V
Packaging Information
Packaging Dimensions1 in. × 1 in. × 2.5 in.
Weight (Packaging)Gold versionT-12AU7-GOLD-JJ0.0265 lbs.
Regular versionT-12AU7-JJ0.0287 lbs.
T-12AU7-JJ - Regular versionBody Height49.2 mm
Cathode Current (Ik)≤ 20 mA
Filament Current (If)300 / 150 mA
Filament Voltage (Uf)6.3 / 12.6 V
Gain (μ)17
Grid Voltage (Ug)≥ -50 V, -8.5 V typical
Heater to cathode resistance (Rk/f)150 kΩ
Heater to cathode voltage (Uk/f)≤ 180 V
Internal Resistance (Ri)7.7 kΩ
Item Diameter22.2 mm
Item Height56.3 mm
Plate Current (Ia)10.5 mA
Plate Dissipation (Wa)≤ 2.75 W
Plate Voltage (Ua)≤ 300 V, 250 V typical
Transconductance (S)2.2 mA/V
T-12AU7-GOLD-JJ - Gold versionBody Height49.2 mm
Cathode Current (Ik)≤ 20 mA
Filament Current (If)300 / 150 mA
Filament Voltage (Uf)6.3 / 12.6 V
Gain (μ)17
Grid Voltage (Ug)≥ -50 V, -8.5 V typical
Heater to cathode resistance (Rk/f)150 kΩ
Heater to cathode voltage (Uk/f)≤ 180 V
Internal Resistance (Ri)7.7 kΩ
Item Diameter22.2 mm
Item Height56.3 mm
Plate Current (Ia)10.5 mA
Plate Dissipation (Wa)≤ 2.75 W
Plate Voltage (Ua)≤ 300 V, 250 V typical
Transconductance (S)2.2 mA/V

My Project Lists

You must be logged in to add items to a project list.

Specifications, Files, and Documents

PDF: Specification Sheet Specification Sheet475.22 KB
Questions? Contact us at [email protected], or give us a call at 480-820-5411

Product Reviews

5.00 out of 5 based on 14 reviews
Cliff Culpepper - February 21st, 2021
5 out of 5

Works fine, just what I needed.

SteveA - February 4th, 2021
5 out of 5

I used these to replace the 12AU7s in my two Heathkit WA-P2 preamps. They work great and sound fine. Old tubes were probably original and the signal was unbalanced between the two channels, now much better.

Tom Heckhaus - March 5th, 2020
5 out of 5

I am using these tubes in Heathkit and other old VTVM's that use same. I've purchased two so far and they work fine.

mpc1968.mc1 - February 20th, 2019
5 out of 5

I knew what they were before purchasing them. Not sure if this will help anyone, because I use the pre-amp valves in 2 Behringer vt999 overdrive pedals to help my Fender champion 40 amp work more like a tube amp. I run one on flat settings then into the other that I control when needed. The low gain tubes keeps the signal cleaner and give the amp warmth without overdriving early. Usually I keep the gain control on zero, & control the gain by the knob on the amp itself. It isn't a tube amp but the 2 pedals working together helps fool many in thinking it is.

Peter Hart - December 20th, 2018
5 out of 5

Not one of the three tubes I bought from you passed when tested in my tube checker. I am very disappointed. I wish you would screen your tubes before selling them to the public. I'd be willing to pay more if I could trust them to be good. It is now holding up a very important amplifier repair.

ecruizer - March 4th, 2016
5 out of 5

I wanted to try this 12AU7 in V1 just to see what it sounded like. It really sounded smooth but you do loose some volume.

david renshaw - October 16th, 2015
5 out of 5

Worked very good.

Joseph Roth - July 12th, 2015
5 out of 5

Fast delivery and they work perfectly for my Hammarlund HQ-180 receiver.

L. Walker - June 15th, 2015
5 out of 5

Received as advertised

Jon Perrelly - April 14th, 2015
5 out of 5

I plugged this tube into its socket and played my guitar. I floated away into space and it was great until I realized I was in a vacuum just like inside the tube and then I was like dude inception and then I was happy.

Substitute Products

The following items can be substituted for this product. While not necessarily exactly the same, they will function as replacement items in your project.