Vacuum Tube - EL84, Mullard Reissue

Vacuum Tube - EL84, Mullard Reissue

Mullard Reissue
Vacuum Tube - EL84, Mullard Reissue image 1
Vacuum Tube - EL84, Mullard Reissue image 2
Click to zoom in
Vacuum Tube - EL84, Mullard Reissue image 1Vacuum Tube - EL84, Mullard Reissue image 2
Customer Images:
No Images yet! Submit a product image below!
Starting at: $17.60
In Stock

Russian made Mullard reissue EL84. Copy of the original. Black plates, carbonized screens, and gold plated grids. This tube was the "Voice of the Vox AC-30." A mainstay of affordable quality hi-fi amplifiers of the 1960s. Tube measurements are as follows:

  • Height: 2.75” (without pins)*
  • Diameter: 0.87”*

*Note: Due to the method of production in regards to the glass, measurements may vary slightly.

Apex Tube Matching
Matched versions of this tube use Apex Matching
RoHS Compliant
SKU:
T-EL84-MUL
Item ID:
004856
Brand:
Mullard Reissue, Apex Matched
Type:
Part Numbers
Single or MatchedOur Part NumberUPC/EAN
Apex Matched PairT-EL84-MUL-MP609722133982
Apex Matched QuadT-EL84-MUL-MQ609722133999
SingleT-EL84-MUL609722133975
Product Measurements by Type
Body Height2.75 in.
Item Diameter0.87 in.
Packaging Information
Packaging DimensionsApex Matched Pair versionT-EL84-MUL-MP3.5 in. × 2 in. × 1 in.
Apex Matched Quad versionT-EL84-MUL-MQ3.5 in. × 2 in. × 2 in.
Single versionT-EL84-MUL1 in. × 1 in. × 3.6 in.
Weight (Packaging)Apex Matched Pair versionT-EL84-MUL-MP0.12 lbs.
Apex Matched Quad versionT-EL84-MUL-MQ0.24 lbs.
Single versionT-EL84-MUL0.06 lbs.
Product Measurements by Item
T-EL84-MUL-MP - Apex Matched Pair versionBody Height2.75 in.
Item Diameter0.87 in.
T-EL84-MUL-MQ - Apex Matched Quad versionBody Height2.75 in.
Item Diameter0.87 in.
T-EL84-MUL - Single versionBody Height2.75 in.
Item Diameter0.87 in.

My Project Lists

You must be logged in to add items to a project list.

Questions and Answers

Click each question to see its answers.
Asked by Anonymous on January 9th, 2016.
JustinG
January 12th, 2016
Staff Member
Top Contributor
Yes. These tubes are matched with the Apex matching system at this time.
Asked by Anonymous on January 9th, 2016.
JustinG
January 12th, 2016
Staff Member
Top Contributor
All matched sets of these tubes are now matched via Apex matching.
Asked by Anonymous on April 17th, 2019.
BradWbr
April 19th, 2019
Staff Member
These tubes are known for their smooth overdriven tone, so using them in a hifi situation would only be advised if the amplifier is kept at lower volume levels.
Asked by Anonymous on February 27th, 2021.
BradWbr
March 2nd, 2021
Staff Member
The 6N1 has several new production offerings that can be viewed by using 6N1 in the search bar. The EL84 is a replacement for a 6P14, but we aren't able to confirm these are compatible with 6P1s,

Product Reviews

5.00 out of 5 based on 10 reviews
- February 15th, 2020
5 out of 5

I have an old Peavey Classic 30. Had JJ’s in it for a long time then I started getting a break up when turned up. Time for new tubes. I went with 4 Mullard EL 84’s for power.
And I’m really pleased with them. I feel like I will stay with these a long time.

- January 19th, 2020
5 out of 5

Im using a pair of these in a Marshall 1954X combo and they are very cool..They have a great overdrive sound.one thing though -they are fairly low output in terms of loudness...they are great for mic recording, and or rehearsing where loud might be problem..They can be compared to the JJ low output EL84 but these sound better.

- December 11th, 2019
5 out of 5

These are THE tubes for an AC30. I have tried and compared: JJ, Tung Sol, Sovtek, Tube Doctor, and TAD. While JJ, Sovtek, and Tung Sol all have good qualities (TAD just isn't the right tonal fit) putting a set of the Mullards in just instantly gives the amp a special sound. It isn't strictly "better" than a JJ sound (which has loads of shimmer and chime), but I just love it. They put out a vintage vibe that really compliments my AC30's jangle, and makes it just sing.

- October 13th, 2019
5 out of 5

After trying a couple of others, I ended up liking these best in my Vox AC10C1. Nice sound.

- December 30th, 2018
5 out of 5

Bought these for my brother as a Christmas present. I've used their EL34s in 8 builds so far and just love em'. So, I bought these without having used them myself, but I've used all the other Mullard reissue tubes and not been disappointed. I'll do a SE EL84 soon and give a valid rewiew then.

- September 2nd, 2018
5 out of 5

These are the best sounding NEW EL84 tubes for guitar amps -especially Marshall, Vox and the Fender "hot rod" series amps. These tubes slide right into a smooth, harmonically rich sounding over drive that slides right Into a screaming saturation at full volume. Ive heard the Russian glass doesn't fit some amps, and that would piss me off but fortunately I haven't encountered that problem.

- July 30th, 2018
5 out of 5

Swapped out the stock JJ EL84 with the Mullard reissue in my Marshall Class 5 combo. The JJ sounded OK but stayed too clean until about 12 o'clock on the volume and even then the crunch was kind of harsh and buzzy. The Mullard starts getting crunchy around 3 1/2 and just keeps getting better. This little bottle is filled to the brim with that sweet Marshall crunch. If you are less than inspired with your Class 5 this tube will get you about as close as you can get to a Plexi with 5 watts and a single 10"

- April 7th, 2018
5 out of 5

I really love these tubes. I don't know how close they actually compare to a real 60's Mullard 84 as I've never played the NOS ones to compare them directly. Without being able to compare them directly, I still want to say these come as close to NOS as you can get without paying 6X the price because I simply can't imagine them sounding any better. I put them in a BLC30 non-top boost(exact 1963 AC30 replica) and they literally made the amp sound twice as good as did with the over-bassy JJs that came stock in it. I put them in a 1997 Vox AC30 Top Boost as well. In both amps it really brings out the chiming harmonics that good Voxes are known for. Some of the best power tube break up characteristics I've ever heard with beautiful chime and jangle..very prominent harmonics, very powerful ballsy break up when cranked.

- December 29th, 2014
5 out of 5

You will love these tubes! I have installed them in several different amps for customers and everyone notices the big difference they make in your sound. Described by customers as "fat,warm, round, curvaceous". The Mullards have warm,early break-up that just sings in distortion. Definite improvement over the usual Sovteks that most manufacturers use today. These tubes are the easiest way to improve your amp without modifications.

- August 7th, 2014
5 out of 5

Get tone! Swapped out the china tubes that came in my Bad Cat Cougar 5 and what a difference!

Substitute Products

The following items can be substituted for this product. While not necessarily exactly the same, they will function as replacement items in your project.