Vacuum Tubes

The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
Vacuum Tube - 6V6, Tetrode, Beam Power
Heater-cathode type beam power amplifier tube designed for service in the output stage of a-c or battery-operated equipment.
$17.90
Vacuum Tube - 6V6GT, Tetrode, Beam Power
Beam-power pentode designed for use in the audio frequency power output stage of television and radio receivers. Capable of supply high power output with high sensitivity, high efficiency, and low third and higher-order harmonic distortion.
$34.90
Vacuum Tube - 6V6GT, Electro-Harmonix
Octal power tube (Max Plate Watts = 14W) Beam power tetrode with a specially developed cathode coating, careful alignment of the grid, tri-alloy plate material for flawless performance up to 475 volts. Perfect for high plate voltage amplifiers like the Fender Deluxe Reverb.
Starting at $32.60
Vacuum Tube - 6V6GT / CV-511, Genalex Gold Lion
Genalex Gold Lion 6V6GT / CV511 beam-power tube. Made in Russia.
Starting at $53.55
Vacuum Tube - 6V6GT, Mullard Reissue
Mullard 6V6GT tube. Made in Russia. This valve is built to stand the high voltages encountered in the Fender Deluxe Reverb and other guitar amplifiers that ran the valves above the published specification. The smooth and balanced frequency response also makes it suitable for hi-fi use.
Starting at $47.75
Vacuum Tube - 6V6GT-STR, Redbase, Tube Amp Doctor
The TAD 6V6GT-STR Redbase combines the tonal characteristics of an NOS 6V6GT such as from RCA or GE with the current requirements. It is a heavy duty 6V6GT tube, which can handle a higher plate voltage than regular 6V6GT tubes. The TAD 6V6GT-STR Redbase shines with the typical NOS "sweet top end" and at the same time a strikingly dense and complex midrange. Especially with this midrange characteristic they achieve a liveliness in tone that only NOS 6V6GT achieve and otherwise remains unmatched. Even when pushed into saturation there are no harsh upper mids, which is frequently the case with other 6V6s. Sweet full-bodied tone with silky highs. Tube Amp Doctor recommends the TAD 6V6GT-STR Redbase for all 6V6 power amps when a full yet freely defined tone is desired. The ideal tube for Fender Deluxe Tweed 5E3 or Blackface Princeton Reverb amps, single ended Class A amps like the Fender Tweed Champ, Vibro Champ, Fender Champion 600 or the Univalve.
Starting at $34.95
Vacuum Tube - 6V6GT, Tung-Sol Reissue
Totally Tweed! The preferred OEM tube of '50s-era Fender Tweed Champ and Deluxe amplifiers The Tungsol 6V6 has a geometry designed to safely handle the higher voltages used in guitar amps " plus heavier plate and grid materials. The result.. better mids and bottom while keeping the smooth top of the classic 6V6's. The Tungsol 6V6 breaks up evenly from low E to high up the neck. Blues players will LOVE these tubes for the way they sing!
Starting at $45.45
Vacuum Tube - 6V6, Double Mica, JJ Electronics
A custom version of the JJ 6V6-S with a double top mica for increased stability. The double mica improves support for the tube structure and reduces mechanical vibrations in its components. These double mica 6V6 tubes are a great option for combo amps and any amplifiers exposed to speaker vibrations. The JJ Electronic 6V6S is another modern classic from JJ. This 6V6 has the standard rugged construction we’ve come to expect from JJ which allows it to handle much higher plate voltages than the typical 6V6 tube. The JJ 6V6 can even be used in place of a 6L6 in some amplifiers. Overall this tube has a warm and balanced tone with incredible separation and response. The highs come in clean and smooth with a lot of clarity. The mids are full and distinctive. The lows are fat and punchy. These tubes can cover a spectrum of sounds and styles all within the same amplifier.
Starting at $23.80
Vacuum Tube - 6V6, JJ Electronics
This 6V6 has the standard rugged construction we’ve come to expect from JJ which allows it handle much higher plate voltages than the typical 6V6 tube. The JJ 6V6 can even be used in place of a 6L6 in some amplifiers. Overall this tube has a warm and balanced tone with incredible separation and response. These tubes can cover a spectrum of sounds and styles all within the same amplifier.
Starting at $23.50
Vacuum Tube - 6Y6GT, Beam Power Amplifier
Beam power pentode primarily intended for use as an audio frequency power amplifier. It is particularly useful in applications where the available supply voltage is relatively low.
$5.90
Vacuum Tube - 7C5, Tetrode, Beam Power
Beam power amplifier tetrode designed for service in the output stage of a-c or battery-operated equipment. It is capable of supplying high-power output, power sensitivity, and efficiency with low percentages of third and higher order harmonics.
$9.90
Vacuum Tube - 12AB5, Tetrode, Beam Power
Beam power tube of the 9-pin miniature type designed for use as the output amplifier in automobile radio receivers operating from a 12-volt storage battery. The 12AB5 can provide high power output.
$5.90
Vacuum Tube - 25L6GT / 25W6, Beam Power Amplifier, Tubular Glass
Beam pentode designed for use in the audio-frequency power output stage of radio and television receivers. Features include high power sensitivity and high efficiency at relatively low plate and screen voltages.
$6.90
Vacuum Tube - 35B5, Tetrode, Beam Power
Miniature beam power amplifier especially designed for use in the power output stage of a-c/d-c receivers. Its small size and high efficiency make the tube especially useful where space limitation prevent the use of larger types.
$3.55
Vacuum Tube - 35C5, Tetrode, Beam Power
Miniature beam pentode primarily designed for use in the audio-frequency power output stage of radio receivers. Features include high power sensitivity and high efficiency at relatively low plate and screen voltages.
$15.90
Vacuum Tube - 35L6GT, Beam Power Amplifier
Beam pentode primarily designed for use in the audio frequency power output stage of radio receivers. Features include high power sensitivity and high efficiency at relatively low plate and screen voltages.
$8.90
Vacuum Tube - 47, Pentode, Power Amplifier, ST Glass
Filament type output power pentode.
$34.50
Vacuum Tube - 50C5, Beam Power Amplifier
Miniature beam pentode primarily designed for use in the audio-frequency power-output stage of radio receivers. The tube features high power sensitivity and high efficiency at relatively low plate and screen voltages
$24.90
Vacuum Tube - 50L6GT, Beam Power Amplifier
The 50L6GT is designed for service in the output stage of ac/dc receivers. It delivers a high power output with high power sensitivity from low supply voltages.
$9.90
Vacuum Tube - 300B, Electro-Harmonix, Gold Pin
Electro-Harmonix 300B power triode tube with gold pins. Made in Russia. Premium version of the 300B EH with gold grid wire for increased bias stability as well as top of the line sonics and performance.
Starting at $192.17
Vacuum Tube - 300B, JJ Electronics
This triode has a full 40 Watts of power. The robust build of the JJ 300B offers high reliability in a classy package. Each tube comes with a factory certification with sets dual matched for anode current and gain. The JJ 300B has a balanced and detailed sound with a wide frequency response.
Starting at $179.95
Vacuum Tube - 807, Beam Power Amplifier
Beam pentode for power amplifier, oscillator, and modulator applications.
$24.70
$89.90
Vacuum Tube - 5881, JJ Electronics
The JJ Electronic 5881 is very similar to the 6L6GC but with a plate dissipation of 23W rather than 30W. Another physical difference is the shorter bulb. These tubes have a soft and balanced response that sounds great in both guitar amps and hifi equipment. The JJ 5881 will work in any amp that uses 6L6 tubes.
Starting at $25.50