Vacuum Tubes
The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
Vacuum Tube - 6626 / 0A2WA, Diode, Gas
Cold cathode, gas-filled diode of miniature construction designed for reliable service as a voltage regulator. It has an operating current range of 5 to 30 milliamperes over which it maintains a substantially constant operating voltage of 150 volts.
$5.25
Vacuum Tube - 6ER5 / EC95, Triode, HF
Semi-remote cutoff, frame grid triode designed for use as a VHF RF amplifier. Features of the design include a partial shield between the grid and plate
$5.35
Vacuum Tube - 12SG7, Pentode, Semi-Remote Cut-Off
Semi-remote cut off pentode voltage amplifier in the octal metal construction. It features high transconductance with low grid-plate capacitance and a dual cathode connection to minimize effects of common cathode circuit coupling.
$5.35
Vacuum Tube - 6FD7, Dual Triode, Dissimilar
Dissimilar section double triode intended to serve the combined functions of the vertical deflection oscillator and amplifier. It features the T-9 bulb with integral wafer base which fits the standard 9 pin miniature socket.
$5.90
Vacuum Tube - 6BC8 / 6BZ8, Dual Triode
Miniature, medium-mu, semi-remote cutoff twin triode intended for application as a VHF cascode amplifier in a television receiver.
$5.90
Vacuum Tube - 50EH5, Pentode, Power Amplifier
Miniature power pentode primarily designed for use in the audio-frequency power output stage of radio receivers and phonographs. The tube features high power sensitivity at low plate and screen voltages.
$5.90
Vacuum Tube - 12AB5, Tetrode, Beam Power
Beam power tube of the 9-pin miniature type designed for use as the output amplifier in automobile radio receivers operating from a 12-volt storage battery. The 12AB5 can provide high power output.
$5.90
Vacuum Tube - 25Z5, Rectifier, Dual, ST Glass
Heater-cathode type full-wave high-vacuum rectifier doubler tube designed for use in the power supply of a-c or a-c/d-c receivers. Eletrically the 25Z5, 25Z6, and 25Z6GT are identical.
$5.90
Vacuum Tube - 1LD5, Diode, Pentode
Diode-audio pentode designed especially for service as a combined diode detector and pentode audio amplifier. The diode plate is located at the negative end of the filament.
$5.90
Vacuum Tube - 12AV6, Dual Diode, Triode
Combines a high mu triode and two independent diode units in the 7-pin miniature construction. It permits a single tube to function as detector, AVC rectifier, and audio amplifier.
$5.90
Vacuum Tube - 6L7G, Pentagrid Mixer
Mixer tube designed for service with a separate oscillator as the first detector in superheterodyne receivers. The control grid is of the remote cut-off type which allows the use of AVC and minimizes cross-modulation.
$5.90
Vacuum Tube - 6BH6 / E90F, Pentode, Sharp Cut-Off
Miniature sharp-cutoff pentode primarily designed for use as a high-gain radio-frequency or intermediate-frequency amplifier. Features include low grid-plate capacitance, relatively high transconductance, and low heater current.
$5.90
Vacuum Tube - 12SC7, Dual Triode, HI-MU
The type 12SC7 is a twin-triode amplifier designed for use as an audio amplifier or phase inverter. Special shielding arrangement in the base permits operation at a low hum level.
$5.90
Vacuum Tube - 12SA7GT, Pentagrid Converter
Pentagrid converter designed to minimize frequency drift. They are intended for service as combined oscillators and mixers in AC, storage battery, and AC/DC operated superheterodynes.
$5.90
Vacuum Tube - 6AV6 / EBC91, Dual Diode, Triode
Miniature duplex-diode, high-mu triode intended primarily for use as a combined detector, amplifier, and automatic-volume-control tube in radio receivers. The triode section incorporates a high amplification factor
$5.90
Vacuum Tube - 14Q7, Heptode
Pentagrid converter designed for use as a combined oscillator and mixer in superheterodyne receiver. The electrical characteristics of the 14Q7 are similar to those of the 12SA7
$5.90
Vacuum Tube - 3A4, Pentode, Power Amplifier
The 3A4 is designed for use in compact, lightweight, portable equipment. The relatively large filament employed in the 3A4 enables it to supply the high peak currents required in RF power applications.
$5.90
Vacuum Tube - 6Y6GT, Beam Power Amplifier
Beam power pentode primarily intended for use as an audio frequency power amplifier. It is particularly useful in applications where the available supply voltage is relatively low.
$5.90
Vacuum Tube - 12AL8, Triode, Tetrode
Power tetrode, medium-mu 9-pin miniature for use in automobile radio receivers operated directly from 12-volt storage batteries.
$5.90
Vacuum Tube - 6AB4 / EC92, Triode
Miniature triode designed for use as a grounded-grid radio-frequency amplifier, frequency converter, or oscillator at frequencies below approximately 300 megacycles.
$5.90
Vacuum Tube - 6AX5GT, Rectifier, Full Wave
Full-wave rectifier of the heater-cathode type intended for use in AC operated and automobile receivers. Because of its heater-cathode construction it has the same heating time as that of other heater-cathode types in the receiver.
$5.90
Vacuum Tube - 12J5GT, Triode, Medium-MU
General purpose medium-mu triode. It is useful for service as an oscillator or audio-frequency amplifier.
$5.90
Vacuum Tube - 1N5GT / 1P5GT, Pentode, Sharp Cut-Off, RF
Filamentary type sharp cut-off pentode voltage amplifier. It is designed for service in low-drain battery-operated receivers as an RF, IF, or AF amplifier.
$5.90