Vacuum Tubes

The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
Vacuum Tube - 1N5GT / 1P5GT, Pentode, Sharp Cut-Off, RF
Filamentary type sharp cut-off pentode voltage amplifier. It is designed for service in low-drain battery-operated receivers as an RF, IF, or AF amplifier.
$5.90
Vacuum Tube - 6Y6G, Tetrode, Beam Power
Beam power amplifier having high power sensitivity and high power output at comparatively low DC supply voltages.
$5.90
Vacuum Tube - 12B4A, Triode, Low MU
Miniature low-mu triode designed primarily for service as a vertical-deflection amplifier in television receivers. The tube features high plate current at relatively low plate voltages
$5.90
Vacuum Tube - 6J11, Dual Pentode
Compactron device containing two sharp cutoff pentodes, designed primarily for intermediate-frequency amplifier service in television receivers.
$5.90
Vacuum Tube - 7695, Beam Power Amplifier
Beam power pentode featuring a remarkably high power sensitivity as an audio power amplifier. In Class A1 operation, it can deliver 4.5 watts of power with a B+ voltage of only 130 volts.
$5.90
Vacuum Tube - 1R5 / DK91, Heptode
Miniature pentagrid-converter designed for use as a combined mixer and oscillator in superheterodyne circuits. Because of its small size and high operating efficiency, the 1R5 is especially adapted for compact, battery-operated equipment.
$5.90
Vacuum Tube - 50BM8 / UCL82, Triode, Pentode, Power
Miniature type triode-pentode designed for use as an AF amplifier by triode section and AF power amplifier by pentode section in radio receivers.
$5.90
Vacuum Tube - 6K5GT, Triode, HI MU
Cathode type high mu triode designed for use in high gain resistance coupled circuits. A lower amplification factor enables the use of a large signal input both under 250 volt and 100 volt operating conditions.
$5.90
Vacuum Tube - 8SN7GTB, Dual Triode
Medium-mu triode intended for use as a combined vertical oscillator and vertical deflection amplifier in 450 mA. series heater operated television receivers.
$5.90
Vacuum Tube - 35Z3, Rectifier, Half Wave
New-Old-Stock (NOS) tube. The 35Z3 is a half-wave high-vacuum rectifier designed for use in a-c/d-c receivers. Electrically the 35Z3 is equivalent to the 35Z5GT except that the heater of the 35Z3 is not tapped for operation of a panel lamp. The 35Z3 is a loctal-based tube (compared to the octal base of the 35Z5GT.)
$5.90
Vacuum Tube - 6L7, Heptode
Mixer tube designed for service with a separate oscillator as the first detector in superheterodyne receivers. The control grid is of the remote cut-off type which allows the use of AVC and minimizes cross-modulation.
$5.90
Vacuum Tube - 12K7GT, Pentode, Remote Cut-Off
Variable-mu pentode amplifier in the octal glass construction. It is suitable for use with AVC in RF and IF amplifier and minimizes cross modulation.
$5.90
Vacuum Tube - 6K7GT, Pentode, Remote Cut-Off, RF
The 6K7GT is an indirectly heated pentode of the vari-mu (remote cut-off) type for use in the RF or IF stages of radio equipment.
$5.90
Vacuum Tube - 6Q7, Dual Diode, Triode
Combines two diodes and a high-mu triode using a common cathode. It is designed for service as a diode detector, AVC rectifier, and as a high gain resistance coupled amplifier in AC, storage battery, and AC - DC operated receivers.
$5.90
Vacuum Tube - 6SQ7GT, Diode, Dual Triode
Duplex-diode high-mu triode intended primarily for use as a combined detector, amplifier, and automatic-volume-control tube in radio receivers. The triode section incorporates a high amplification factor
$5.90
Vacuum Tube - 14N7, Dual Triode
Combines two low-mu triodes in the lock-in construction. It is designed for use either as a phase inverter or as a voltage amplifier.
$5.90
Vacuum Tube - 25Z6GT, Dual Rectifier
Heater-cathode type full-wave high-vacuum rectifier doubler tube designed for use in the power supply of a-c or a-c/d-c receivers. Eletrically the 25Z5, 25Z6, and 25Z6GT are identical.
$5.90
Vacuum Tube - 6BZ6 / 6JH6, Pentode, Semi-Remote Cut-Off
Miniature semi-remote-cutoff pentode designed primarily for use as an intermediate frequency amplifier in television receivers.
$5.90
Vacuum Tube - 36AM3B, Rectifier, Half Wave
Half-wave rectifier in the 7 pin miniature construction. Features of the tube are a 100mA. heater with 20 second warm-up time.
$5.90
Vacuum Tube - 7A7, Pentode, Remote Cut-Off
Pentode voltage amplifier using the lock-in construction. It is designed for RF or IF service in AC/DC receivers.
$5.90
Vacuum Tube - 6SK7GT, Pentode, Remote Cut-Off, RF
Remote-cutoff pentode. It is designed for use as a high-gain radio-frequency or intermediate-frequency amplifier in a radio receiver.
$5.90
Vacuum Tube - 3A5 / DCC90, Dual Triode
The 3A5 is intended for use in high frequency applications. The relatively large filament employed in the 3A5 enables it to supply the high peak currents required in RF power applications.
$5.90
Vacuum Tube - 0B2, Voltage Regulator, Diode, Glow-Discharge
The 0B2 is a two-electrode, inert-gas-filled cold cathode miniature tube intended for use as a voltage regulator.
$5.90
Vacuum Tube - 12AU6, Pentode, Sharp Cut-Off
The 12AU6 is a pentode amplifier having a sharp cut-off control characteristic using the miniature construction. With high transconductance, low grid-plate capacitance, it is intended for service as either an RF or AF amplifier.
$5.90