The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
Vacuum Tube - 6922 / E88CC, Triode, Dual
DC-AC heating twin triode
Vacuum Tube - 37, Triode
General purpose triode designed for service as an oscillator, detector, or amplifier.
Vacuum Tube - 6293, Beam Power Amplifier
Small, sturdy, beam power amplifier tube intended for pulse modulator service in both fixed and mobile equipment.
Vacuum Tube - 2C22 / 7193, Triode
Out of Stock
Vacuum Tube - 6AR6, Tetrode, Beam Power
Beam power amplifier designed specifically for applications requiring relatively high peak plate currents at negative grid potentials. It is constructed to withstand relatively high plate potentials.
Vacuum Tube - 5881, Tung-Sol, Tetrode, Beam Power
The 5881 is the electrical equivalent to types 6L6 and 6L6GC except that the plate and screen dissipation ratings have been increased approximately 20 percent.
Vacuum Tube - 6H6G, Dual Diode
Twin-diode with individual cathodes brought out to separate base pins. The 6H6 is designed for service as a diode detector, automatic volume control rectifier, or as a low current power rectifier
Out of Stock
Vacuum Tube - 6LR8, Triode, Pentode
Triode-pentode containing a high-mu triode and a beam pentode. The triode is designed for service as a vertical-deflection oscillator, and the pentode as a vertical-deflection amplifier in television receivers.
Vacuum Tube - 26Z5W, Dual Rectifier
Ruggedized heater-cathode type double diode using the 9 pin miniature construction. It is suitable for use in half or full wave rectifier applications or as a voltage doubler.
Vacuum Tube - 417A, Western Electric, Triode
9-pin miniature triode with an indirectly heated cathode. It is intended primarily for grounded-grid operation in the input stage of broad band amplifiers.
Vacuum Tube - 6AC5GT, Triode, Power Amplifier
High-mu power output triode designed for service in dynamic coupled circuits using a type 76, 6P5GT/G or 6J5GT/G as a driver. Two 6AC5GTs may be used as a zero bias class B amplifier.
Vacuum Tube - 6111, Triode, Dual
Subminiature medium-mu twin triode for use in general purpose amplifier applications. Each section has an individual cathode and is electrically independent.
Vacuum Tube - 6AK8 / EABC80, Dual Diode, Triode
Triple diode triode for F.M. or FM/AM broadcast receivers and for video and audio signal detection in television receivers.
Vacuum Tube - 6L6G, Beam Power Amplifier, ST Glass
The 6L6G is designed with high power sensitivity and high efficiency for service in the output stages of AC receivers. They are capable of delivering an output at all power levels with a very low percentage of harmonic distortion.
Vacuum Tube - 7591A, Beam Power Amplifier
Glass octal beam power pentode designed for use as an audio frequency power output tube. The tube has a high power sensitivity and high efficiency and is especially designed for applications where high power output is required.
Vacuum Tube - 8950, Pentode, Power Amplifier
Compactron beam power pentode primarily designed for RF power output applications. Features of the 8950 are dual cathode and grid connections for lower lead inductance, and a 13 volt heater.
Vacuum Tube - 25CD6G, Beam Pentode
New Old Stock (N.O.S.) tube. 25CD6GB is identical to the 6CD6GA except with different heater ratings. Beam power tube, octal base.
Vacuum Tube - 6X5G, Rectifier, Full Wave
The 6X5G is an indirectly heated full-wave rectifiers for use in equipment where the current drain does not exceed 70 mA.
Out of Stock
Vacuum Tube - 826, Triode, Power Amplifier
Transmitting triode for operation at maximum ratings up to 250 Mc.
Vacuum Tube - C1K / 6014, Thyratron
Compact, quick heating thyratron designed for timing and control applications. It is xenon filled for quick starting and the ability to operate within very wide temperature limits.
Vacuum Tube Sampler Set - EL84, 9 tubes total
Package of 9Sampler set of EL84 vacuum tubes. Contains one each of the following: Electro-Harmonix EL84, Genalex Gold Lion EL84, JJ Electronic EL84, Mullard Reissue EL84, Sovtek EL84, Tung-Sol EL84, JJ Electronic EL844, Sovtek EL84M, Tube Amp Doctor EL84
Vacuum Tube - 0B3 / VR90, Voltage Regulator
The 0B3 is a two-element gas-filled, cold cathode voltage regulator. It is designed to provide regulated outputs of approximately 90 volts.
Vacuum Tube - 5751, JJ Electronics
A dual triode that can be used in place of most 12AX7 circuits. The rugged build of this tube and reduced gain (30% less than a 12AX7) can improve headroom and give better control in high gain stages allowing users to more easily dial in sweet spots. The JJ 5751 features a smooth and balanced tone and a detailed response with low noise and low microphonics.
Vacuum Tube - E83CC Frame Grid, JJ Electronics
Alternative to the 12AX7 or ECC83. The JJ Electronic E83CC is a high quality dual triode that rivals the NOS version of this tube. The E83CC was originally designed as an audio specific dual triode with very low noise and microphonics. The JJ E83CC stays true to the original design with the signature thick frame grid and boxed plate. The rigid frame allows for tighter tolerances and closer construction which results in lower noise and increased stability. The JJ Electronic E83CC is a great choice for high fidelity amplifiers as well as guitar amps and studio equipment. The E83CC has the same pinout and amplification factor as a standard 12AX7 and can be used in any 12AX7 or ECC83 position. Guitarist Description: This frame grid tube has an incredibly rich yet balanced tone. The E83CC works well for clean sounds but also breaks up with a satisfying warmth and plenty of articulation.