Vacuum Tubes

Miniature, medium-mu, semi-remote cutoff twin triode intended for application as a VHF cascode amplifier in a television receiver.

Miniature medium-mu twin triode suitable for use in a wide variety of general-purpose applications. It is particularly useful as a vertical-deflection oscillator and horizontal-deflection oscillator in television receivers.

The JJ Electronic ECC99 is a noval based dual triode. This tube features a rugged construction and is also available with gold pins. The ECC99 is typically used as a driver for power triodes in 2A3 and 300B amplifiers but can also be used as a power tube in small amps and headphone amps. This tube can also be a functional replacement for 5687, E182CC, 6840, and 6BL7 tubes. Note: Sockets on some of these types could have a different set-up.

Sharp-cutoff pentode of the 9-pin miniature type intended for use as an audio amplifier in applications requiring reduced microphonics, leakage noise, and hum.

Octal rectifier tube (Max DC output current = 125 mA) An indirectly heated diode intended for rectification of commercial-frequency alternating current. It has a 140 mA maximum output and filament voltage of 5 V and a filament current of 2 A ± 0.2 mA.

The 50L6GT is designed for service in the output stage of ac/dc receivers. It delivers a high power output with high power sensitivity from low supply voltages.

Miniature pentagrid converter designed for use as a combined mixer and oscillator in superheterodyne circuits.

The 6AL5 combines two independent diode units in the 7 pin miniature construction. Its high perveance permits high efficiency in either FM or AM detector service.

9 pin miniature type beam power tube. Its heater has a controlled warm-up time.

The JJ Electronic 7027A offers the same reliability and tone as the JJ 6L6GC but with the correct pinout for vintage amplifiers that use 7027 tubes like older Ampegs. At 30W, this tube delivers plenty of headroom. The highs are clear and responsive with warm mids and tight solid lows. Known for their reliability and articulation, the JJ 7027A is a great option guitar amplifiers and Hi-Fi stereo equipment.

Voltage Regulator, Diode, Glow-Discharge type.

The 5881 is a very reliable tube that is widely used in many current production tube amplifiers. It has a warm tone with good 'bite.' This modern version is able to tolerate higher voltages than its 5881 / 6L6 cousins. The Sovtek 5881 delivers a warm, round tone that "sweetens" any vintage or modern guitar amp design. Built to rigid military standards, the 5881 will tolerate higher voltages than any other 6L6. In fact, they're frequently used as replacements for the old 7027 model in vintage Ampegs. Extremely consistent from piece to piece.

Premium directly heated heavy duty rectifier Diode. Re-issue of the most popular rectifier valve ever built by Mullard. Helps extend the life of the other valves in the amplifier by allowing them to heat up before plate voltage is applied.

• Low internal voltage drop & controlled heater warm up time
• Excellent choice for both Hifi and instrument amplification
• Replacement/upgrade for all 5AR4/GZ34 types

The Psvane KT88 is a high quality, high power, beam tetrode with an octal base. The KT88C is notable for its warmth and clarity across the entire audio spectrum. The Psvane Classic Series is focused on the reproduction of popular vacuum tubes found in classic audio equipment. When designing the Classic Series, Psvane collected the most sought-after NOS tubes and analyzed each element of their construction, incorporating the most effective manufacturing techniques to produce stable tubes with excellent sound. Whether used in guitar amplifiers or hifi stereo systems, the Psvane Classic Series vacuum tubes excel in all applications. Psvane has been producing high quality vacuum tubes since 2011. The Psvane team originally formed in Shuguang’s high-end tube division but eventually split off to form their own brand. Psvane has since acquired their own manufacturing facilities with the goal of improving the production and performance of vacuum tubes.

0A2 or 150C2 - Voltage Regulator, Diode, miniature glow-discharge type.

Beam power pentode intended for service as an audio power amplifier.

Beam pentode primarily designed for use in the audio frequency power output stage of radio receivers. Features include high power sensitivity and high efficiency at relatively low plate and screen voltages.

Miniature, medium-mu twin triode primarily designed for use as a cascode, radio-frequency amplifier in very high frequency television tuners. In this application, its performance is characterized by high gain and low noise figure.

The Psvane 5U4G is a directly-heated rectifier with an octal base. The Psvane 5U4G features the iconic shouldered bottle of the original 5U4G rectifiers. This tube is a great rectifier for any type of amplifier. The Psvane Classic Series is focused on the reproduction of popular vacuum tubes found in classic audio equipment. When designing the Classic Series, Psvane collected the most sought-after NOS tubes and analyzed each element of their construction, incorporating the most effective manufacturing techniques to produce stable tubes with excellent sound. Whether used in guitar amplifiers or hifi stereo systems, the Psvane Classic Series vacuum tubes excel in all applications. Psvane has been producing high quality vacuum tubes since 2011. The Psvane team originally formed in Shuguang’s high-end tube division but eventually split off to form their own brand.

Dissimilar double-triode designed for use as a combined vertical-deflection oscillator and amplifier in television receivers.

The TAD EL34-STR REDBASE™ is a glass envelope pentode with a plate dissipation rating of 25 Watts with convection cooling. It is intended for audio frequency power amplification service in either pentode, ultralinear or triode connection and single ended or push-pull/parallel applications.
The TAD EL34-STR REDBASE™ is designed to be a direct replacement for any EL34 / 6CA7 / KT77 or equivalent. Close manufacturing specification tolerances, gold wire grid, improved processing and final testing and QC at TAD in Germany provides enhanced reliability, superior sonic performance and grants overall consistency.

Russian made Mullard reissue EL84. Copy of the original. Black plates, carbonized screens, and gold plated grids. This tube was the "Voice of the Vox AC-30." A mainstay of affordable quality hi-fi amplifiers of the 1960s. Tube measurements are as follows:

• Height: 2.75” (without pins)*
• Diameter: 0.87”*

*Note: Due to the method of production in regards to the glass, measurements may vary slightly.

Electro-Harmonix 6973 Power Tube Beam power amplifier used in vintage Gretsch and Magnatone amplifiers. This is a real 6973, not a rebrand of a "close" tube.

Dissimilar double-triode designed for use as a combined vertical-deflection oscillator and amplifier in television receivers. Section 1 is intended for service as an oscillator and section 2 as an amplifier.