Vacuum Tubes

Sharp cut-off general purpose amplifier. With the exception of heater and capacitance ratings, the electrical characteristics are similar to those of the 6C6.

Higher in gain than the 5881WXT, with full base. Modelled after the vintage RCA 6L6GC "blackplate," the Sovtek 6L6WXT+ features larger plate dimensions and improved grid structure for increased power handling capabilities.
The 6L6WXT+ also features mica spacers with metal springs to eliminate tube rattle and microphonics. The Sovtek 6L6WXT+ yields a 20% higher output than the Sovtek 5881WXT and offers superior tone and overall performance to any 6L6 or KT66. The ultimate 6L6, the WXT+ will improve the sound of any 6L6 guitar amplifier.

The TAD EL34-STR REDBASE™ is a glass envelope pentode with a plate dissipation rating of 25 Watts with convection cooling. It is intended for audio frequency power amplification service in either pentode, ultralinear or triode connection and single ended or push-pull/parallel applications.
The TAD EL34-STR REDBASE™ is designed to be a direct replacement for any EL34 / 6CA7 / KT77 or equivalent. Close manufacturing specification tolerances, gold wire grid, improved processing and final testing and QC at TAD in Germany provides enhanced reliability, superior sonic performance and grants overall consistency.

The 6K6GT is an indirectly heated cathode type power amplifier pentode designed for service in the output stages of AC, AC/DC and storage battery operated receivers.

Due to many requests by fans, the Tung-Sol EL84/6BQ5 has been reissued. The Tung-Sol EL84 / 6BQ5 was a popular OEM tube for American-made EL84 / 6BQ5 guitar amplifiers, such as those built by Gibson and Harmony. Due to its rugged construction and conservative ratings, it is the most reliable current production EL84 type available for use in Vox AC-30 type amplifiers. In addition, its linearity and tone characteristic make it the ideal replacement for EL84 hi-fi amplifiers, such as those built by Fisher, Scott, and Harmon-Kardon. Tube measurements are as follows:

• Height: 2.75” (without pins)*
• Diameter: 0.87”*

*Note: Due to the method of production in regards to the glass, measurements may vary slightly.

Tung Sol 5AR4 rectifier tube. Made in Russia. Premium directly heated heavy duty rectifier Diode. Helps extend the life of the other valves in the amplifier by allowing them to heat up before plate voltage is applied. Tung-Sol tubes reflect the best in vintage construction with unsurpassed tone and reliability.

• Low internal voltage drop & controlled heater warm up time
• Excellent choice for both Hifi and instrument amplification
• Replacement/upgrade for all 5AR4/GZ34 types

Combines a high mu triode and two independent diode units in the 7-pin miniature construction. It permits a single tube to function as detector, AVC rectifier, and audio amplifier.

Mullard 12AU7 / ECC82 dual triode preamp tube. Made in Russia.

Miniature tube which contains a sharp-cutoff pentode and a medium-mu triode. Each section has a separate cathode and is electrically independent.

Variable mu pentode amplifier in the octal metal (glass) construction. It is suitable for use with AVC in RF and IF amplifiers and minimizes cross modulation.

The T-12SK7 is the same as the 6SK7 except for heater ratings.

Miniature, duplex-diode, high-mu triode designed for use as a combined detector, amplifier, and automatic-volume-control tube

Triode-pentode in the 9 pin miniature construction. It is designed for use as a frequency changer in television receivers.

Cathode type rectifier designed particularly for use in automobile receivers.

High-mu twin triode designed for use in resistance-coupled circuits as a voltage amplifier or phase inverter. Except for heater characteristics and ratings, the 12SL7GT is identical to the 6SL7GT.

Miniature tube which contains a sharp-cutoff pentode and a triode in one envelope. Each section has a separate cathode and is electrically independent. Primarily intended as a combined triode oscillator and pentode mixer in television receivers.

The 12AU6 is a pentode amplifier having a sharp cut-off control characteristic using the miniature construction. With high transconductance, low grid-plate capacitance, it is intended for service as either an RF or AF amplifier.

Russian made reissue of the original Tungsol.
The 5881 is the electrical equivalent to types 6L6 and 6L6G except that the plate and screen dissipation ratings have been increased approximately 20 percent. It embodies a complete mechanical redesign which results in greater resistance to shock and vibration.

9 pin miniature type beam power tube. Its heater has a controlled warm-up time.

Premium high-voltage power pentode, featuring improved materials and workmanship over the original EL34B. Higher impedance design with increased touch responsiveness.

• Unique clipping characteristic with a hint of 6L6 sound
• Velvety-smooth in HiFi applications, full & rich-sounding in guitar amps
• 6CA7 equivalent

The 0B2 is a two-electrode, inert-gas-filled cold cathode miniature tube intended for use as a voltage regulator.

Heater-cathode type power rectifier in the miniature construction. Its low voltage drop and small size adapt it to use with vibrator-type inverters in automobile receivers.

Heater-cathode type diode designed for use as a half-wave rectifier in ac/dc receivers. A heater tap is provided to permit operation with a panel lamp.

The JJ Electronic EL844 is a variation on the classic tube which reduces the overall headroom by 25%. With the reduced power, hitting that rich distortion that the EL84 is notorious for is more manageable. This tube will hit full saturated power tube sounds without having to crank the amps volume as high which makes them a great choice for recording as well as home / bedroom use.