1. Home
  2. Products
  3. Vacuum Tubes

Vacuum Tubes

The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
products per page
T-6AJ5
Vacuum Tube - 6AJ5, Pentode, Sharp Cut-Off
Miniature sharp cutoff pentode designed for use where only low plate and screen voltages are available. The 6AJ5 is especially suitable for operation at high frequencies.
$6.25
T-1LN5
Vacuum Tube - 1LN5, Pentode (VT179)
Sharp-cutoff pentode designed for use as a radio-frequency, intermediate frequency, or audio-frequency amplifier in battery operated receivers.
$6.25
T-14B6
Vacuum Tube - 14B6, Dual Diode, Triode
Combined high-mu triode and double diode using the 8 pin lock-in construction. It is designed for use as a diode detector, AVC rectifier, and an impedance or resistance coupled amplifier.
$6.40
T-5763
Vacuum Tube - 5763, Tetrode, Beam Power
Heater-cathode type transmitting beam power amplifier in the 9 pin miniature construction. It is intended for use in compact, low-power mobile transmitters and in the low-power stages of larger fixed station transmitters.
$6.45
Save 50%
Originally: $12.90
T-AZ41
Vacuum Tube - AZ41, Rectifier, Full Wave
High vacuum full wave rectifying tube.
$6.45
Save 50%
Originally: $12.90
T-6SB7-Y
Vacuum Tube - 6SB7-Y, Pentagrid Converter
Pentagrid metal tube designed for use as a combined mixer and oscillator in superheterodyne circuits. Especially useful in FM receiver service below 120 megacycles.
$6.65
T-6CM6
Vacuum Tube - 6CM6, Tetrode, Beam Power
Miniature beam power pentode designed for service as a general purpose audio power amplifier or vertical deflection amplifier in television receiver sweep circuits
$6.90
T-12AT6_HBC90
Vacuum Tube - 12AT6 / HBC90, Dual Diode, Triode
Combined high-mu voltage amplifier and double-diode detector using the 7-pin miniature construction. It is intended to provide output voltage adequate for full-power output of most beam-power tubes.
$6.90
T-12V6GT
Vacuum Tube - 12V6GT, Tetrode, Beam Power
Beam pentode designed primarily for use in the audio output stage of a-c and storage-battery-operated equipment. It is capable of supplying high power output with high sensitivity, high efficiency, and low third and higher-order harmonic distortion.
$6.90
T-5672_DL69
Vacuum Tube - 5672 / DL69, Pentode
Subminiature pentode for use as an A.F. power amplifier in portable equipment.
$6.90
T-6D6
Vacuum Tube - 6D6, Pentode, Remote Cut-Off
Triple grid variable MU amplifier. It is suitable for use with AVC in RF and IF amplifiers as it minimizes cross modulation
$6.90
T-6F7
Vacuum Tube - 6F7, Pentode
Combines a triode and a remote cut-off pentode, utilizing a common cathode, in a single bulb.
$6.90
T-12SK7
Vacuum Tube - 12SK7, Pentode, Remote Cut-Off
The T-12SK7 is the same as the 6SK7 except for heater ratings.
$6.90
T-5AZ4
Vacuum Tube - 5AZ4, Rectifier, Full Wave
Filament-type high-vacuum full-wave rectifier designed for service in power supplies of moderate current requirements. The electrical characteristics of the 5AZ4 are equivalent to those of the 5Y3GT.
$6.90
T-0C3-A_VR105
Vacuum Tube - 0C3-A / VR105, Voltage Regulator
The 0C3-A is a two-element gas filled, cold cathode voltage regulator. It is designed to provide a regulated output of approximately 105 volts.
$6.90
T-6ES8_ECC189
Vacuum Tube - 6ES8 / ECC189, Dual Triode, Remote Cut-Off
Semi-remote cutoff double triode designed for use as a cascode VHF amplifier. It features extremely high gm, low capacitance, and low noise.
$6.90
T-6CW5_EL86
Vacuum Tube - 6CW5 / EL86, Pentode, Power Amplifier
The 6CW5 is an A.F. output pentode in the 9 pin miniature construction. It is intended for use in single-ended push-pull output stages.
$6.90
T-6J7_EF36
Vacuum Tube - 6J7 / EF36, Pentode, Sharp Cut-Off
Sharp cut-off general purpose amplifier. With the exception of heater and capacitance ratings, the electrical characteristics are similar to those of the 6C6.
$6.90
Out of Stock
T-10BQ5
Vacuum Tube - 10BQ5, Beam Power Amplifier, output pentode
The 10BQ5 is an output pentode designed for application in medium power hi-fi amplifiers. A pair of tubes in class AB, push-pull conventional operation yields an output of up to 17 watts at 4% distortion (without feedback).
$6.90
T-12B7_14A7
Vacuum Tube - 12B7 / 14A7, Pentode, Remote Cut-Off
Pentode type amplifier tube with remote cutoff characteristics designed for use as a high frequency amplifier in radio receivers.
$6.90
T-13EM7_15EA7
Vacuum Tube - 13EM7 / 15EA7, Triode, Dissimilar Double
Dissimilar double-triode designed for use as a combined vertical deflection oscillator and amplifier in television receivers
$6.90
T-12SL7GT
Vacuum Tube - 12SL7GT, Triode, Dual, HI-MU
High-mu twin triode designed for use in resistance-coupled circuits as a voltage amplifier or phase inverter. Except for heater characteristics and ratings, the 12SL7GT is identical to the 6SL7GT.
$6.90
T-6SS7
Vacuum Tube - 6SS7, Pentode, Remote Cut-Off
The 6SS7 is an RF pentode which as remote plate current cutoff. It is suitable for operating with AVC in Rf and IF amplifiers. The use of this tube will reduce cross modulation effects.
$6.90
T-6SJ7
Vacuum Tube - 6SJ7, Pentode, Sharp Cut-Off
Metal sharp-cutoff pentode designed for use as a biased detector or high-gain amplifier.
$6.90