Wire

High quality USA made Gavitt. This wire features an outer waxed cotton braid over a celanese braid. The wire is stranded 22AWG with a tinned overcoat (topcoat) so no additional tinning with a soldering iron is required for use. Sold by the foot.

High quality USA made Gavitt wire. This wire features an external braided shield covering a waxed black cotton cloth braid over a celanese braid. The wire is stranded 22AWG with a tinned overcoat (topcoat) so no additional tinning on the inner wire is required for use. Sold by the foot.

For vintage reverb tank cables. 22 AWG, stranded with tin braid. Outer Diameter: 0.10". 105°C temperature rating, 600V. Sold per foot.

High quality USA made Gavitt. This wire features an outer waxed cotton braid over a celanese braid. The wire is stranded 18AWG with a tinned overcoat (topcoat) so no additional tinning with a soldering iron is required for use. Sold by the foot.

20 AWG fiberglass sleeving is varnished and closely resembles early style spaghetti. 11 AWG also available as part number S-M401W. Minimum order is 10 feet. This product has a Class F electrical insulation, manufactured by impregnating and coating a finely braided fiberglass sleeving with a dielectric film of acrylic resin.

RG-174 military grade. Outer diameter = .105". Sold per foot.

Shielded 4-conductor wire used in wiring pickups, controls etc. Shielded 4-conductor wire is commonly used in humbucking pickups to allow more wiring flexibility over the 2-conductor setup. Building a pickup using 4-conductor wire will allow you to wire up coil cut, phase switching, and series/parallel configurations. Additionally, 2 conductor pickups can be converted to 4-conductor using this wire.

• Sold per foot
• 28 AWG
• Foil shield
• 12”/3.2mm outer diameter
• Sold individually

High quality spiral shielded wire with a small outer diameter of 0.138 inches. Both the core wire and spiral shield are tinned copper so soldering is easy. The gray outside jacket and blue core insulation have a similar appearance to the type of wire used in vintage pedals such as the Supa Fuzz, Tone Bender, and Zonk Machine. The core wire is 7 strand 24AWG.

Nylon cable clamps perfect for securing cables to cabinet walls. These clamps feature a .203 in. mounting hole. The ⅜ in. diameter cable clamp is commonly used on Fender® amplifiers for securing the power cord. SKU Diameter P-HCABLECLAMP-38 ⅜ in. P-HCABLECLAMP-12 ½ in. The 5/16" version works well with the S-W125X and S-W132X bare end power cables.

Vintage style push back wire. Especially useful for building or repairing single coil pickups. Push-back style eliminates the need for stripping.

• Outer diameter: 0.07"
• Sold by the foot

Vintage style speaker cable. ¼" plug to (2) spade lugs. Perfect replacement for vintage guitar amps where the speaker plugs directly into the chassis. 34" total length.

#20 solid copper wire with modern insulation and lacquered cotton braid finish. 105°C temperature rating, 600V. For a stranded version, see: S-W7XL

High quality 22AWG wire from Weico featuring a topcoat of solder over the strands. This wire is pre-tinned in the sense that a coating of solder is already applied, bonding the individual strands together so no additional tinning is required.

Self adhesive metal cable clips. They easily attach to most surfaces using a strong foam adhesive. These cable clips are a great way to tidy up project wiring and securing components.

11 AWG White fiberglass sleeving is varnished and closely resembles early style spaghetti. 20 AWG available with part number S-M436W. This is a coated fiberglass sleeving made by applying a proprietary blend of acrylic polymers to a closely woven electrical grade fiberglass substrate. This sleeving has excellent electrical, chemical and oil resistance properties, excellent heat stability and flexibility for ease of push-up and recovery. It exhibits excellent resistance to oils, acids and alkalis and solvents.

#20 stranded copper wire with modern insulation and lacquered cotton braid finish. Provides safety and authentic vintage look. 105°C temperature rating, 600V. For a solid core version, see: S-W8XL

Solid tinned copper bus wire. Great for point to point builds, guitar electronics wiring, or any situation where insulated wire is not required. 105°C temperature rating, 600V. Sold by the foot. For 100ft spools, please see S-W428X.

White celanese covered wire, resembling early cotton covered wire, may be color dyed. Cotton wrap, #24 magnet wire.

High quality 24AWG wire from Weico featuring a topcoat of solder over the strands. This wire is pre-tinned in the sense that a coating of solder is already applied, bonding the individual strands together so no additional tinning is required. This wire is ready to go as soon as it is cut and stripped making assembly that much easier. Rated at 300V and offered in a variety of colors, this wire is a great option for a variety of different projects.

600V solid wire. UL style 1015, rated to 105 degrees C. Perfect for new projects, rewiring electrical equipment, or use in breadboards, perfboard, and veroboard/stripboard.

Nylon cable clamp with room for 1/4” cable outer diameter. Perfect for securing cables to cabinet walls. For larger ½” cable clamps see P-HCABLECLAMP-X.

Four conductor Flexstrip ribbons cables. These ribbons feature a nomex insulator so there are no melting issues when soldering. Unlike typical ribbon cables, the wires are designed to distribute the stress of the bend and vibrations throughout the entire cable rather than directly on the solder joints. These cables are a great choice for PCB to PCB connections in pedals, synths, and other electronics. The spacing is .1" (2.54mm).

Twisted pair of 18 AWG stranded speaker wires with quick disconnects on each end. Perfect for easy wiring in speaker cabinets.

Six conductor Flexstrip ribbons cables. These ribbons feature a nomex insulator so there are no melting issues when soldering. Unlike typical ribbon cables, the wires are designed to distribute the stress of the bend and vibrations throughout the entire cable rather than directly on the solder joints. These cables are a great choice for PCB to PCB connections in pedals, synths, and other electronics.