Made in U.S. Modern spec tune-o-matic bridge. No retaining wire. Plated, preslotted saddles. Hardware included This is an awesome OEM bridge for builders or the DIY repairman offering a longer adjustment area and more mass than the original ABR-1 bridge. It matches Gibson specifications and is a drop-in, non-modification required replacement part.

• Thread = M5 - 0.8 Metric (as used by Gibson on Nashville Models)
• Post to Post Spacing = 2.93 in. (74.5mm)
• Saddle Notch = Center Notched Saddles
• Saddle Material = Zmac
• Bridge Material = Zmac
• Post/Thumbwheel Material = Brass
• Radius = 12 inch
• Post Top Diameter = .195 Inches / 4.95mm
• Bridge Center To Center Spacing = 2.93 inches
• Saddle Spacing = 10.4 mm

2 to 1 heat shrink tubing variety pack. This pack includes six different diameters ranging from 1/16” to 1/2”. Each piece is 2.5” in length. This set comes in a hard plastic case perfect for sorting and storing heat shrink. Features:

• Resistant to common fluids and solvents
• UL and CSA listed
• UV resistant
• Meets DEF. STAN 59.97
• Meets UL 224, 125°C and CSA C22.2 No. 198.1
• Meets MIL-DTL-23053/5 Class 2 & 3
• Flame retardant (Does not include transparent)
• Seals and protects cable splices and terminations.
• Thin wall tubing

The Amphenol T series SwitchPlug™ uses a unique 360 degree precision sliding helical spring contact design to quietly and accurately switch the signal circuit safely to ground during instrument changes under load, thereby avoiding annoying thumps, pops and squeals.

Amphenol AC "Z" series XLR metal chassis mount connector. 3 pole female, D Flange, machined, black finish. The metal chassis mount "Z" series connectors are designed for the audio user where durability, reliability and strength across a wide range of applications are important. All AC products are manufactured to the highest quality standards and will withstand the harshest environments. Features

• The “D” size housing can be either front or rear mounted using the same panel cutout
• A leading first mate last break socket contact is standard on all female connectors (Pin 1)
• Solder cup
• Connectors are fitted with a grounding system for RFI shielding applications
• Compatible with all other XLR brands

Note: A ground tag is standard on all AC "Z" series connectors.

The Fender® Original Series raises the bar for quality and reliability with their coiled cables. This cable uses a 23 gauge 99.95% oxygen free copper conductor with a 90% shield and a classic Fender® color for the insulation. These hand soldered cables use nickel plated ¼” connectors with a right angle and one straight plug.

• Designed for push-pull tube output circuits.
• Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
• Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref.

1/4" Stereo Phone plug, Diecast Shell, Satin finish, Flexible grommet. Features:

• Stylised Shell design
• Robust diecast shell
• Great solderability with increased solder area
• Precision machined contacts
• Flexible grommet cable protection
• Quick and easy assembly

The DMT is a passive dual mode guitar tone control designed specifically for electric guitars that can operate in either HIGH PASS or LOW PASS modes greatly expanding the instruments tonal possibilities without the use of a battery or active electronics. Micro switches on the circuit board provide the user the ability to select one of two different frequency ranges for both high and low pass modes. Easy installation with no capacitors or other parts needed. Replace the tone control in you guitar with one that you will actually use!

PCB and parts kit for the Iss 2 fuzz built in the style of a BC108 Fuzz Face. This kit includes all of the resistors, capacitors, and transistors used on the included circuit board. For the BC108 style parts kit, a pair of BC108C transistors are included.

High quality digitally controlled soldering iron from Atten. The ST-2090D is a 80W benchtop soldering iron with a ton of features packed into its small package. This powerful iron features accurate and adjustable temperature control along and is compatible with a wide variety of tip options. This iron has a built-in dry tip cleaner and an attachable solder spool stand. Conical tip included. Features

• Digital led display
• Combined soldering station with soldering iron and solder wire holder.
• MCU controlled temperature calibration with PID system equipped
• Adjust temperature by knob button, easy to operate.
• The handle structure is ergonomically designed for comfortable grip.
• The heating wire and sensor are made of PTC material, which is quick in temperature rise and precise in temperature control.
• Auto-standby, auto-shut down is available.

Use this Fret Slotting Miter Box to accurately cut fret slots with a fretting handsaw. The ball-bearing guides make sawing easier and faster; they hold your fret saw perpendicular to the fingerboard and can be adjusted to match the blade precisely. You can quickly slot any board up to 3"" (76.2mm) wide, with adjustable depth of cut for any fret wire. You always have an unobstructed view of your work.
Made of rugged aluminum and 12" (304.8mm) long, this miter box has convenient mounting holes for firm attachment to your workbench, the mounting screws and spanners are included. Instructions also included.

Includes: 3 pole, 3 position rotary switch (3P3T), 1/4" output jack and black chicken head knob. Hammond 1600A series transformers provide 'easy wire secondary' impedances of 4, 8, or 16 ohms. We now offer a selector switch, pre-wired and complete with 1/4" output jack. Follow simple instructions provided to wire transformer secondary to switch, mount switch and 1/4" jack in separate 3/8" diameter holes in chassis and you'll easily be able to select output impedance as necessary. (Not recommended for 1645A or 1650G)
(See P-H1600 for a selector switch to work with Hammond 1600 series transformers.)

High quality insulation cover for panel mount fuse holders. The cover is made of a thick durable PVC and fits many fuse holders. The wire sleeve can securely fit over any standard wire gauge used with fuse holders providing a fully insulated fuse connection.
Features

• Provides insulation against shock on rear of fuse holder
• PVC
• UL94V-0 rated flame retardant material

Fits S-H205

PCB and parts kit for the MKIII / MKIV fuzz. This kit includes all of the resistors, capacitors, diodes, potentiometers, and terminal pins used on the included circuit board. The germanium PNP transistors are not included such that customers can select and test their own.

High quality insulation cover for IEC C14 AC Power inlets. The cover is made of a thick durable PVC and fits most standard C14 type power inlets. The wire sleeve can be cut to securely fit over any standard wire gauge providing a fully insulated AC inlet.

The shrink ratio on this tubing is 2 to 1, it is fungus resistant and non-corrosive. It is recommended for tightly sealing connectors, terminals, wire splices, and tool handles. It may be shrunk with heat guns, oven, etc. Comes in 6 inch lengths, quantity of 27.

The HB-Classic α is a vintage-style humbucker pickup. This pickup uses a made in USA Alnico 2 bar magnet for a smooth vintage tone. This pickup is wax-potted for sonic stability and uses a shielded 4-conductor wire for various wiring options. The HB-Classicα humbucker comes in various open and covered options to match the look of any guitar. Mounting screws and springs are included. Made in Japan.

2-pole 1/4" professional straight phone plug, gold contacts, black shell. Large jaw cable clamp for use with cable with an outer diameter of 5.5mm to 6.5mm.

Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires. PBA pickup uses Alnico 5 rod magnets and a knifeedge gloss-cover hot coil wind that delivers a forceful sound with pushed midrange but tight bass and treble response. This pickup provides the humbucking punch and boom associated with the electric bass.

Amphenol AC "Z" series XLR metal chassis mount connector. 3 pole male, D Flange, Stamped contacts, Nickel finish. The metal chassis mount "Z" series connectors are designed for the audio user where durability, reliability and strength across a wide range of applications are important. All AC products are manufactured to the highest quality standards and will withstand the harshest environments. Note: A ground tag is standard on all AC "Z" series connectors. Although the ground tag is intended for RFI shielding applications, Amphenol cannot guarantee its effectiveness in all cases.

Uninsulated fork terminals for use with #8 studs. These terminals fit 22AWG through 16AWG wire gauges and feature a serrated barrel for a strong crimped connection. Made of tin plated copper.

The shrink ratio on this tubing is 2 to 1, it is fungus resistant and non-corrosive. It is recommended for tightly sealing connectors, terminals, wire splices, and tool handles. It may be shrunk with heat guns, oven, etc. Comes in 6 inch lengths, quantity of 23.

• Universal primary with taps for 100, 120, 220 or 240 VAC, 50 / 60 Hz. (Except the 260A6 which is 117V, 50/60 Hz only)
• Designed for preamps, low power amps, general replacement, test equipment, etc.
• Economical, open frame, chassis mount - two hole (.187 dia. = G) channel bracket (figure #1) or four hole mounting (figure #2).
• Units include a Faraday shield between the primary and secondary windings. Our electrostatic shield reduces the capacitive coupling from the primary - greatly attenuating higher frequency current coupling to the secondaries.
• Minimum 5" long leads.
• For more selection check out our P-T300-X series of universal plate & filament transformers.

Kent is one of the foremost pickup designers in the industry, and years of listening to what the customer wanted to hear has culminated in the esteemed Kent Armstrong pickups. With his pickups, Kent has one goal in mind: to give every player their dream sound. Faithfully recreated from the famous 1957 Patent Applied For design humbucking pickup with the same plain enamel 42 AWG wire and Alnico 2 magnets for the warmth and singing tone the originals are known for. Proper 49.2mm pole piece spacing, braided wire with no tap and maple spacers. For the first time you can get a true calibrated set for neck and bridge position but the options don't stop there.