Wire

Three conductor Flexstrip ribbons cables. These ribbons feature a nomex insulator so there are no melting issues when soldering. Unlike typical ribbon cables, the wires are designed to distribute the stress of the bend and vibrations throughout the entire cable rather than directly on the solder joints. These cables are a great choice for PCB to PCB connections in pedals, synths, and other electronics. The spacing is .1" (2.54mm).

11 AWG White fiberglass sleeving is varnished and closely resembles early style spaghetti. 20 AWG available with part number S-M436W. This is a coated fiberglass sleeving made by applying a proprietary blend of acrylic polymers to a closely woven electrical grade fiberglass substrate. This sleeving has excellent electrical, chemical and oil resistance properties, excellent heat stability and flexibility for ease of push-up and recovery. It exhibits excellent resistance to oils, acids and alkalis and solvents.

High quality 18% Nickel-Silver fret wire in medium sizes.

• 2.3mm - 2.4mm Crown Widths, (0.091" - 0.095")
• 1.1mm - 1.3mm Crown Heights, (0.043" - 0.051")

Straight 2ft lengths sold individually or by the pound. For additional sizes and options please see:

• Small Sizes - P-GTFW-S-X
• Jumbo Sizes - P-GTFW-J-X
• Stainless Steel - P-GTFW-STEEL-X

SKU Crown Width Crown Height Total Height Tang Width Stud Width Additional Info P-GTFW-M-1 2.3 mm (0.091") 1.1 mm (0.043") 2.6 mm (0.102") 0.65 mm (0.026") 0.95 mm (0.037") A popular medium size for electric guitars P-GTFW-M-2 2.4 mm (0.095") 1.2 mm (0.047") 2.8 mm (0.110") 0.60 mm (0.024") 0.95 mm (0.037") A popular tall and narrow style, similar size to Stew Mac 141 P-GTFW-M-3

Very flexible, high flame retardant polyolefin heat shrink tubing. Unheated outer diameter of about 7.6 mm with a 2:1 shrink ratio. Resistant to common liquid solvents with excellent physical, chemical, and electrical performance.

Six conductor Flexstrip ribbons cables. These ribbons feature a nomex insulator so there are no melting issues when soldering. Unlike typical ribbon cables, the wires are designed to distribute the stress of the bend and vibrations throughout the entire cable rather than directly on the solder joints. These cables are a great choice for PCB to PCB connections in pedals, synths, and other electronics.

For vintage reverb tank cables. 22 AWG, stranded with tin braid. Outer Diameter: 0.10". 105°C temperature rating, 600V. Sold per foot.

High quality stainless steel fret wire available in popular sizes.
Straight 2ft lengths sold individually or discounted by the pound.
Per pound quantities


SKU
Qty
Price


P-GTFW-STEEL-1
32
PRICE


P-GTFW-STEEL-3
22
PRICE


For standard 18% Nickel-Silver options please see:

• Small Sizes - P-GTFW-S-X
• Medium Sizes - P-GTFW-M-X
• Jumbo Sizes - P-GTFW-J-X

SKU
Crown Width
Crown Height
Total Height
Tang Width
Stud Width
Additional Info


P-GTFW-STEEL-1
2.0 mm (0.079")
1.0 mm (0.039")
2.8 mm (0.110")
0.6 mm (0.024")
0.95 mm (0.037")
Similar size to Dunlop 6260, Stew Mac 147, commonly used on Vintage Fender, Banjos, Pre-War Gibsons


P-GTFW-STEEL-3
2.7 mm (0.106")
1.4 mm (0.055")
3.2 mm (0.126")
0.6 mm (0.024")
0.95 mm (0.037&qu

Durable heavy duty nylon cable ties. These zip ties are a great way to tidy up project wiring and securing components. Features

• Approved for outdoor use.
• UL Listed 6.6 nylon.
• Locks tightly - Won’t stretch or slide.
• Temperature range from 40° to 180°F.
• 8 inch length
• 40 lb tensile strength

Twisted pair of 18 AWG stranded speaker wires with quick disconnects on each end. Perfect for easy wiring in speaker cabinets.

Solid tinned copper bus wire. 105°C temperature rating, 600V.

High quality USA made Gavitt. This wire features an outer waxed cotton braid over a celanese braid. The wire is stranded 22AWG with a tinned overcoat (topcoat) so no additional tinning with a soldering iron is required for use. Sold by the foot.

Self adhesive metal cable clips. They easily attach to most surfaces using a strong foam adhesive. These cable clips are a great way to tidy up project wiring and securing components.

Shielded 4-conductor wire used in wiring pickups, controls etc. Shielded 4-conductor wire is commonly used in humbucking pickups to allow more wiring flexibility over the 2-conductor setup. Building a pickup using 4-conductor wire will allow you to wire up coil cut, phase switching, and series/parallel configurations. Additionally, 2 conductor pickups can be converted to 4-conductor using this wire.

• Sold per foot
• 28 AWG
• Foil shield
• 12”/3.2mm outer diameter
• Sold individually

Vintage style speaker cable. ¼" plug to (2) spade lugs. Perfect replacement for vintage guitar amps where the speaker plugs directly into the chassis. 34" total length.

Nylon cable clamps perfect for securing cables to cabinet walls. These clamps feature a .203 in. mounting hole. The ⅜ in. diameter cable clamp is commonly used on Fender® amplifiers for securing the power cord. The ¼ in. diameter cable clamp is commonly used on Fender® amplifiers for securing the RCA reverb tank cables. The 5/16 in. version works well with the S-W125X and S-W132X bare end power cables.

20AWG wire with seven strands of silver plated copper in a black PTFE jacket. PTFE is more commonly known as Teflon. This wire meets NEMA HP-3 (M16878) UL1213 Type E Commercial & UL/CSA Mil Spec PTFE specifications and is suitable for internal wiring of electronic equipment and appliances. Nema HP-3 insulation is self extinguishing, non-flammable, and has excellent chemical resistance.

22 AWG stranded hook-up wire on a 50 foot roll. This wire is smaller than our other wire options which makes it perfect for tight spaces like effects pedal and other small electronic projects. Strands are tinned individually. See photo for detail.

18 gauge braided power cord in gold - approximates the look of vintage power cords. 105°C temperature rating, 600V.

High quality 42AWG Elektrisola P155 magnet wire with heavy (two coats) enamel. Perfect for winding coils, pickups, or transformers. Properties

• Very good solderability
• High thermal properties

Applications

• Small transformers
• Relays
• Solenoids
• Small motors
• Watch coils
• Transformers
• Instruments

Please note: Product length is based on weight and may vary slightly from the listed values. SKU Weight Approx. Length S-MW-42-2OZ 2 oz. 6200 ft S-MW-42-4OZ 4 oz. 12400 ft S-MW-42-8OZ 8 oz. 24800 ft S-MW-42-1LB 1 lb 49600 ft

105°C rating, 600V. Solid core.

Insulated with two coats of enamel. Perfect for winding coils or transformers. 40 gauge, 750 foot spool. 105°C temperature rating, 600V.

Durable nylon cable ties. These zip ties are a great way to tidy up project wiring and securing components. Features

• Approved for outdoor use.
• UL Listed 6.6 nylon.
• Locks tightly - Won’t stretch or slide.
• Temperature range from 40° to 180°F.

Fender® replacement pre-cut vintage fret wire. Pre-radiused to 7.25"
Features:
24 vintage-style pre-cut frets for guitar fingerboards
Pre-radiused to 7.25"
Each piece .039" tall and .084 wide

Variety pack, 10 feet for each color. Great for color-coded wiring with smaller quantities. 600V stranded. Strands are tinned individually. See photos for detail. UL style 1015, rated to 105 degrees C. Perfect for new projects or rewiring any electrical equipment. 6 Pack (6 colors, 60 total feet) includes:

• Black
• Red
• Green
• White
• Yellow
• Blue

​​9 Pack (9 colors, 90 total feet) includes:

• Black
• Red
• Green
• White
• Yellow
• Blue
• Orange
• Brown
• Purple

See S-W22 for 50 foot rolls of individual colors.