Wire

Nylon cable clamp with room for 1/4” cable outer diameter. Perfect for securing cables to cabinet walls. For larger ½” cable clamps see P-HCABLECLAMP-10.

Nylon cable clamps perfect for securing cables to cabinet walls. These clamps feature a .203 in. mounting hole. The ⅜ in. diameter cable clamp is commonly used on Fender® amplifiers for securing the power cord. SKU Diameter P-HCABLECLAMP-38 ⅜ in. P-HCABLECLAMP-12 ½ in.

White celanese covered wire, resembling early cotton covered wire, may be color dyed. Cotton wrap, #24 magnet wire.

20 AWG fiberglass sleeving is varnished and closely resembles early style spaghetti. 11 AWG also available as part number S-M401W. Minimum order is 10 feet. This product has a Class F electrical insulation, manufactured by impregnating and coating a finely braided fiberglass sleeving with a dielectric film of acrylic resin.

Very flexible, high flame retardant polyolefin heat shrink tubing. Unheated outer diameter of about 7.6 mm with a 2:1 shrink ratio. Resistant to common liquid solvents with excellent physical, chemical, and electrical performance.

Solid tinned copper bus wire. Great for point to point builds, guitar electronics wiring, or any situation where insulated wire is not required. 105°C temperature rating, 600V. Sold by the foot. For 100ft spools, please see S-W428X.

High quality USA made Gavitt wire. This wire features an external braided shield covering a waxed black cotton cloth braid over a celanese braid. The wire is stranded 22AWG with a tinned overcoat (topcoat) so no additional tinning on the inner wire is required for use. Sold by the foot.

Three conductor Flexstrip ribbons cables. These ribbons feature a nomex insulator so there are no melting issues when soldering. Unlike typical ribbon cables, the wires are designed to distribute the stress of the bend and vibrations throughout the entire cable rather than directly on the solder joints. These cables are a great choice for PCB to PCB connections in pedals, synths, and other electronics. The spacing is .1" (2.54mm).

Four conductor Flexstrip ribbons cables. These ribbons feature a nomex insulator so there are no melting issues when soldering. Unlike typical ribbon cables, the wires are designed to distribute the stress of the bend and vibrations throughout the entire cable rather than directly on the solder joints. These cables are a great choice for PCB to PCB connections in pedals, synths, and other electronics. The spacing is .1" (2.54mm).

11 AWG White fiberglass sleeving is varnished and closely resembles early style spaghetti. 20 AWG available with part number S-M436W. This is a coated fiberglass sleeving made by applying a proprietary blend of acrylic polymers to a closely woven electrical grade fiberglass substrate. This sleeving has excellent electrical, chemical and oil resistance properties, excellent heat stability and flexibility for ease of push-up and recovery. It exhibits excellent resistance to oils, acids and alkalis and solvents.

Durable nylon cable ties. These zip ties are a great way to tidy up project wiring and securing components. Features

• Approved for outdoor use.
• UL Listed 6.6 nylon.
• Locks tightly - Won’t stretch or slide.
• Temperature range from 40° to 180°F.

High quality USA made Gavitt. This wire features an outer waxed cotton braid over a celanese braid. The wire is stranded 22AWG with a tinned overcoat (topcoat) so no additional tinning with a soldering iron is required for use. Sold by the foot.

High quality USA made Gavitt. This wire features an outer waxed cotton braid over a celanese braid. The wire is stranded 18AWG with a tinned overcoat (topcoat) so no additional tinning with a soldering iron is required for use. Sold by the foot.

Durable heavy duty nylon cable ties. These zip ties are a great way to tidy up project wiring and securing components. Features

• Approved for outdoor use.
• UL Listed 6.6 nylon.
• Locks tightly - Won’t stretch or slide.
• Temperature range from 40° to 180°F.
• 8 inch length
• 40 lb tensile strength

Six conductor Flexstrip ribbons cables. These ribbons feature a nomex insulator so there are no melting issues when soldering. Unlike typical ribbon cables, the wires are designed to distribute the stress of the bend and vibrations throughout the entire cable rather than directly on the solder joints. These cables are a great choice for PCB to PCB connections in pedals, synths, and other electronics.

Eight conductor Flexstrip ribbons cables. These ribbons feature a nomex insulator so there are no melting issues when soldering. Unlike typical ribbon cables, the wires are designed to distribute the stress of the bend and vibrations throughout the entire cable rather than directly on the solder joints. These cables are a great choice for PCB to PCB connections in pedals, synths, and other electronics. The spacing is .1" (2.54mm).

For vintage reverb tank cables. 22 AWG, stranded with tin braid. Outer Diameter: 0.10". 105°C temperature rating, 600V. Sold per foot.

Shielded 4-conductor wire used in wiring pickups, controls etc. Shielded 4-conductor wire is commonly used in humbucking pickups to allow more wiring flexibility over the 2-conductor setup. Building a pickup using 4-conductor wire will allow you to wire up coil cut, phase switching, and series/parallel configurations. Additionally, 2 conductor pickups can be converted to 4-conductor using this wire.

• Sold per foot
• 28 AWG
• Foil shield
• 12”/3.2mm outer diameter
• Sold individually

18 gauge braided power cord in gold - approximates the look of vintage power cords. 105°C temperature rating, 600V.

RG-174 military grade. Outer diameter = .105". Sold per foot.

Nylon cable tie mounts with adhesive backing. These mounts easily attach to most surfaces using a strong foam adhesive. Zip ties can be fed through the openings on the mount to secure wires to an enclosure, board, or any other convenient location.

Vintage style push back wire. Especially useful for building or repairing single coil pickups. Push-back style eliminates the need for stripping.

• Outer diameter: 0.07"
• Sold by the foot

Insulated silver-plated copper wire. 105°C rating, 600V.

Twisted pair of 18 AWG stranded speaker wires with quick disconnects on each end. Perfect for easy wiring in speaker cabinets.