CAUTION: DO NOT ATTEMPT TO OPERATE ON CURRENT OTHER THAN THAT NOTED ON INSTRUMENT. IF RECEIVER DOES NOT START WORK ING IN ABOUT ONE MINUTE AFTER BEING TURNED ON REVERSE ATTACHMENT PLUG. INSTALLATION: " Ant " lead may be fed from indoor or outdoor aerial. radiator, bed springs or any large metal object, if desired.

BALANCING: Attach output of 175 k.c. oscillator to grid of 286 tube at front of chassis. Adjust the condenser screws in top of tall can and one in under side of panel to loudest point. Repeat adjustment. Disconnect oscillator. Turn dial to station near 1400 k.e. and adjust trimmers on tuning condenser to loudest signal. Turn dial to station near 550 kc. and adjust condenser screw in center of rear Aange to loudest point.

PHONOGRAPH: Use a single pole switch mounted as near as possible to second detector socket, connect in series with lead from ground end of grid cott of second detector tube. Solder phonograph pickup leads to switch terminale.

GUARANTEE: This instrument is guaranteed for ninety days, within which period any part showing electrical or mechanical defect will be replaced without charge when returned prepaid to the factory, but it the complete instrument is returned a nominal charge will be made for such labor as may be necessary to install the defective part.