Clearance Items

The Ultimate Tone, Volume 3, Generations of Tone
by Kevin O'Connor
Have you ever wondered if there is a better way to build a Bassman, Champ, Plexi, an 800, AC-30, Bulldog or Portaflex? Or you wanted to build an SVT with off-the-shelf parts? How about a master-volume amp that doesn't change tone with the master setting? Everything you need to know is right here, including: proper grounding techniques, wiring methods, and mechanical considerations. Eighteen chapters cover the "iconic" amps everyone knows and loves, with schematics and layouts for each, along with the technical history of the product.
$85.00
The Ultimate Tone, Volume 5, Tone Capture
by Kevin O'Connor
Every part of your system contributes to your Ultimate Tone, so every part is important. The Ultimate Tone, Volume 5 delineates, in clear language, the function of each electronic component in a circuit, and how alterations to the value of each part affect the final sound. Gain stage voicing, interstage attenuator optimization, sustain restoration for clean and distorted tones, power amp and preamp "tone generators", simple boost pedals, amp selectors and power conditioners are all covered, with designs using off-the-shelf parts. Like TUT3, this is a "project book" presenting design challenges and solutions, with a diversity of tube and solid-state circuits for bass, guitar and keyboards.
$79.95
The Ultimate Tone, Volume 6, Timeless Tone Built for the Future
by Kevin O'Connor
The evolution of guitar amp circuits becomes a revolution! The Ultimate Tone, Volume 6 takes you through advanced DC Power Scaling methods; reveals the secrets of Dumble amps; explores the truth about high-gain preamps; demonstrates how to build Z-B-X push-pull power amps with a single power tube; simplifies the design of 400W+ tube amps - methods that can be applied to any power level; presents class-G tube amps where 100W of output has the same waste heat as a 25W amp; explores modern mains control and sustain circuitry.
$85.00
Capacitor - 100V, Ceramic Disc, ± 10%
100 V ceramic disc capacitors. ± 10% tolerance.
Starting at $0.25
Radio Kit - 2 Tube Regenerative Radio
This radio kit will cover the AM radio band along with the SW radio band. Power for this receiver is 1.5 V DC for the filaments and 45V DC for the plate current. A D cell and five 9V transistor batteries wired in series will work to power this radio. A 2000 ohm headset or an audio amplifier is required. Requires two T-1T4_DF91 tubes (not included).
$54.95
Recone Kit - Celestion, For G12 Blue Guitar Speaker
Original Celestion Guitar Speaker Recone Kit. For 12" Celestion G12 Alnico Blue (our SKU's P-A-G12-8 and P-A-G12-15)
$115.00
Effects Pedal - Maxon, OOD9, Organic Overdrive
The OOD9 is the updated version of the original Maxon overdrive pedal, the OD880. This overdrive is equipped with NJM4558D op amps for a warm and low-noise overdrive that pairs perfectly with tube amplifiers and other distortion pedals. The OOD9 offers a dynamic response that preserves the tone of the input providing a smooth and clear overdriven sound.
$157.95
Effects Pedal - Maxon, SM9Pro+, Super Metal Pro Plus
The SM9Pro is an upgraded version of the classic SM9 from Maxon. The original core of the circuit was kept intact and bolstered to meet the needs of heavy metal guitarists. A refined EQ control featuring an adjustable mid scoop allows users to dial in the perfect balance for their sound. The gain control provides sounds that range from classic heavy metal to the devastating tones of modern metal.
$169.95
Driver - Celestion, 1", CDX1-1445 Ferrite Compression, 20W, 8Ω
  • 1" exit lightweight and compact ferrite magnet compression driver with 1.4" copper clad aluminium voice coil
  • 20Wrms power handling (AES standard) and 106dB sensitivity
  • One piece PETP diaphragm and surround
  • Finite Element Analysis (FEA) techniques used to optimise both magnetic and acoustic design
  • Suitable for 2-way and 3-way systems
$51.50
Speaker - Celestion, 12", F12-X200, 200W, 8Ω
The F12-X200 is Celestion’s answer to the growing trend of full-range flat-response speakers. The F12-X200 provides a massive 200W power rating. Celestion’s decades of experience in speaker construction shines in this unique design that offers neutral voicing while maintaining the feel and response of a Celestion guitar speaker.
$199.00
Speaker - Celestion, 10", Vintage G10, 60W
A worthy successor to the Vintage 10, the G10 Vintage is a 10" speaker with bags of attitude. Using powerful ceramic magnets and the same voice coil design as the Vintage 30, the G10 packs an impressive punch with its 60W power handling. With the fast response of a 10" but with the strong and creamy vocal tones of a 12", the G10 is the ideal choice to add depth to hollow-sounding amps, or for players who want to get humbucker-type girth from single-coils. Can be used singly to add vocal warmth to small valve combos, or in quartets for a weightier but still lively attack.
$109.00
Speaker - Celestion, 12", Cream, 90W
With a 90-watt power rating, the Celestion Cream is purpose-built for vintage tones, whatever kind of amp you use. By applying new technologies and manufacturing methods developed during the creation of our Creamback speakers, we've been able to deliver a higher power rating while preserving the very essence of an alnico guitar speaker.
Delivering a glorious, laid-back attack, the Cream exudes warm lows and a brilliant bell-like chime. It has smooth and organic mids, further characterised by a fine-grained detail that adds a high-definition quality to the vocal range.
The Cream has been specially created to bring alnico class to all kinds of amps from 1-watt to 90-watts. It conveys a satisfying warmth, detailed expressiveness and exceptional musicality, even at low power levels.
$320.00
Speaker - Celestion, 12", G12 Ruby, 35W
The Celestion Ruby is vintage voiced alnico speaker that straddles the classic chime of the Blue and celebrated warmth of the modern Cream. The Ruby features a rich and musical frequency response with smooth, airy highs and a nuanced midrange with the natural bite found only in a vintage alnico speaker. This versatile 35 watt speaker is an excellent choice for a 4x12 cabinet and really shines in a single 12” cabinet or combo amp. The Celestion Ruby offers guitar players the ability to discover new tones within the spectrum of vintage sound.
$320.00
Speaker - Celestion, 12", G12T Hot 100, 100W
With a massive 100W power rating, this speaker sits perfectly in high-power or hybrid amplifiers. It voices a modern sound with a big bass presence.
$135.00
Note: P-A-T5155: 4 Ω is a special order item.
Speaker - Jensen® Jets, 12", The Raptor, 100W
The Raptor is one of the newest Jensen speakers, released after a long time in development refining the ideal qualities of a contemporary, sophisticated, touch responsive speaker. The result is a 100W ceramic speaker with a characteristic, vocal, rounded midrange and a silky-smooth top end, all based on a solid, fat and firm bass foundation. Eminently versatile, the Raptor is equally suitable to clean, crunch and lead tones. Guitarist Description: Powerful, smooth and warm. Excellent definition in the upper midrange. When presented with overdrive distortion, it exhibits a silky, full-sounding lead tone.
  • Lows: Fat/Deep
  • Mids: Firm/Vocal
  • Highs: Subtle/Extended
  • Overdrive: Smooth/Crunchy
Starting at $117.60
Save 15%
Originally: $138.35
Speaker - Jensen® Jets, 10", Tornado Classic, 100W
Like its 12” version, the Tornado 10 is remarkably versatile, with evenly balanced tone, excellent articulation, and a detailed, dynamic response with a hint of a very musical, sweet dynamic compression. The powerful Neodymium magnet and the 2” voice coil allow for 100W of power handling in a featherlight weight of just 1.7kgs (3.75lbs)
$211.55
Speaker - Jensen® Jets, 12", Tornado Stealth 100, 100W
The Tornado Stealth 100 is the original Tornado 12, the first of the new generation of Neodymium speakers in the Jensen offering with an added stylish bell cover over the magnet. Possibly the most versatile Jensen speaker ever, it has clear, almost HD top end, well-balanced midrange and powerful bass end. It lends itself to a wide range of musical genres, with a smooth, never aggressive personality, from fast solo runs, to complex chordal harmonies, to soulful lead tones.
Starting at $197.02
Save 15%
Originally: $231.79
Speaker - Jensen® Jets, 12", Tornado Stealth 80, 80W
The Tornado Stealth 80 is the Neodymium counterpart of the ceramic powered Electric Lightning. The Stealth 80 is extremely efficient, with slightly scooped mids, and it shines in the cleanest as well as in the heaviest tonal applications. It delivers exceptional punch and attack, retaining all the clarity needed for palm-muted riffs and power chords, as well as crystal clear clean rhythm playing.
$209.96
Save 20%
Originally: $262.45
Speaker - Jensen® Vintage Alnico, 12", P12N, 50W
The AlNiCo P12N is surely one of the most iconic Jensen speakers of the late ‘50s. Visually impressive because of the big bell cover on the magnet, it is the highest powered 12” speaker in the range. Among others, the P12N was used in the high-end amps of the time such as the Fender® Tweed Twin. Crystal clear in the treble range with transparent mids and powerful but tight bass, it is the “King of Clean Tones”.
Starting at $274.97
Save 15%
Originally: $323.50
Cover - Humbucker, Open, Nickel Silver, USA
Colors Available:
Original, made in USA, covers for humbucker pickups. These premium humbucker covers are made of nickel silver and have no holes.
Starting at $8.75
Cover - Mini Humbucker, 50mm, Nickel Silver, USA
Colors Available:
Original, made in USA, covers for mini humbucker pickups. These premium humbucker covers are made of nickel silver and have a 50mm spacing.
$13.25
Bridge - ABR-1, Wired, Plated Brass Saddles, USA
Colors Available:
Made in U.S. vintage spec ABR-1 bridge made to the same specifications as the original 1950s version. Wired with plated brass saddles. Mounting hardware sold separately. The bridge features the vintage-style retaining wire that secures the plated brass saddles and intonation screws onto the bridge.
  • Post spacing: 2.93 inches (74.5mm)
  • Radius: 12 inches (30.48cm)
  • String Spacing: 10.4 mm
Starting at $32.92
Bridge - Wraparound, Vintage Spec, Aluminum, USA
Colors Available:
U.S. made and true to vintage 1950s specifications. This lightweight (35 grams) wraparound bridge is made of aluminum to match the original 1950s version. High quality plating is used on all options. Each side is adjustable using the included hex set screws to dial in the intonation. Mounting studs sold separately. For a full set with all hardware included, please see P-GKLU-KLP1127N.
  • 3.22 in. (82mm) stud spacing
Starting at $25.25
Pickguard - Strat® style, 11 hole, Anodized Aluminum
Colors Available:
Anodized aluminum Stratocaster® style pickguards with 11 mounting holes. These pickguards are cut for the classic Strat® configuration. All mounting holes are countersunk.
$24.95